NEWS

FIBARO-002 | Remotely controlled Dimmer 2 FIBARO light dimming module
FIBARO-002 FGD-212
  • Remotely controlled Dimmer 2 FIBARO light dimming module
  • Designed to work with various types of light sources
  • Can be used as a switch with non-dimmable light sources
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Advanced microprocessor control
  • Intelligent light source detection algorithm implemented
  • Automatic setting of the control mode appropriate to the connected load
  • Active power and energy measurement functionality
  • Soft start function
  • Memory of the last light level settings
  • It works with various types of switches: momentary, toggle, three-way, etc
  • Active element: semiconductor electronic switch
  • To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations FGD-212 is an extension unit
FIBARO-002 | Remotely controlled Dimmer 2 FIBARO light dimming module
FIBARO-002 FGD-212

Remotely controlled Dimmer 2 FIBARO light dimming module. Designed to work with various types of light sources. Can be used as a switch with non-dimmable light sources. Compatible with any Z-Wave or Z-Wave Plus controller. Advanced microprocessor control. Intelligent light source detection algorithm implemented. Automatic setting of the control mode appropriate to the connected load. Active power and energy measurement functionality. Soft start function. Memory of the last light level settings. It works with various types of switches: momentary, toggle, three-way, etc. Active element: semiconductor electronic switch. To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations FGD-212 is an extension unit

FIBARO-003 | Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
FIBARO-003 FGR-223
  • Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
  • Based on Z-Wave 5 technology
  • Works with single phase AC
  • Provides precise positioning of blinds, awnings or doors
  • Incorporates power measurement function when used with a FIBARO Home Center
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption
  • Supports blind motors with mechanical and electrical limit switches
  • It works on the basis of advanced microprocessor control
  • It allows to measure the active power and the total energy consumption
  • It works with different types of buttons: monostable, bistable and roller blinds
  • Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards.
FIBARO-003 | Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
FIBARO-003 FGR-223

Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates. Based on Z-Wave 5 technology. Works with single phase AC. Provides precise positioning of blinds, awnings or doors. Incorporates power measurement function when used with a FIBARO Home Center. Compatible with any Z-Wave or Z-Wave Plus controller. Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption. Supports blind motors with mechanical and electrical limit switches. It works on the basis of advanced microprocessor control. It allows to measure the active power and the total energy consumption. It works with different types of buttons: monostable, bistable and roller blinds. Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards.

FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213
  • FIBARO Switch-2 module for remote control of an electrical device
  • Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled
  • It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch
  • Equipped with an active power and energy consumption measurement function
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Advanced microprocessor control
  • Active power and energy measurement functionality
  • It works with various types of switches (momentary, toggle, three-way, etc.)
  • To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations
FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213

FIBARO Switch-2 module for remote control of an electrical device. Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled. It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch. Equipped with an active power and energy consumption measurement function. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Advanced microprocessor control. Active power and energy measurement functionality. It works with various types of switches (momentary, toggle, three-way, etc.). To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations

FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214
  • Smart Module Smart Module FIBARO remote control
  • Designed to turn a device or circuit on and off
  • It allows to control the devices through the Z-Wave network or with buttons connected directly to them
  • It works with various types of switches and buttons
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)
FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214

Smart Module Smart Module FIBARO remote control. Designed to turn a device or circuit on and off. It allows to control the devices through the Z-Wave network or with buttons connected directly to them. It works with various types of switches and buttons. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)

FIBARO-006 | FIBARO Smoke Sensor
FIBARO-006 FGSD-002
  • FIBARO Smoke Sensor
  • Optical and universal Z-Wave smoke detector
  • Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor)
  • Designed to be mounted on a wall or ceiling
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Extremely easy installation
  • Battery operation
  • 3 levels of sensitivity
  • Built-in case opening detection
  • The alarm is signaled with sound, visual indicator and Z-Wave control command
  • Programmable over-temperature warning
  • Self test performed every 10 seconds
FIBARO-006 | FIBARO Smoke Sensor
FIBARO-006 FGSD-002

FIBARO Smoke Sensor. Optical and universal Z-Wave smoke detector. Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor). Designed to be mounted on a wall or ceiling. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Extremely easy installation. Battery operation. 3 levels of sensitivity. Built-in case opening detection. The alarm is signaled with sound, visual indicator and Z-Wave control command. Programmable over-temperature warning. Self test performed every 10 seconds

FIBARO-007 | FIBARO CO Sensor
FIBARO-007 FGCD-001
  • FIBARO CO Sensor
  • Z-Wave carbon monoxide detector
  • Ultralight, compact and battery powered
  • Equipped with a temperature sensor
  • Compatible with any Z-Wave or Z-Wave Plus Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Designed to mount on the wall
  • Completely via radio
  • Built-in siren and LED diode.
FIBARO-007 | FIBARO CO Sensor
FIBARO-007 FGCD-001

FIBARO CO Sensor. Z-Wave carbon monoxide detector. Ultralight, compact and battery powered. Equipped with a temperature sensor. Compatible with any Z-Wave or Z-Wave Plus Controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Designed to mount on the wall. Completely via radio. Built-in siren and LED diode.

FIBARO-008 | Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
FIBARO-008 FGWPF-102
  • Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
  • It works with any device with an output power of up to 2500W
  • Compatible with any Z-Wave controller
  • Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher)
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher)
  • Advanced microprocessor control
  • Executive element: relay
  • Active power and energy measurement functionality
  • Compact and elegant housing
  • Simple installation - just plug it in
FIBARO-008 | Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
FIBARO-008 FGWPF-102

Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form. It works with any device with an output power of up to 2500W. Compatible with any Z-Wave controller. Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher). Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher). Advanced microprocessor control. Executive element: relay. Active power and energy measurement functionality. Compact and elegant housing. Simple installation - just plug it in

FIBARO-009 | Walli Dimmer FIBARO smart dimmer
FIBARO-009 FGWDEU-111
  • Walli Dimmer FIBARO smart dimmer
  • Designed to control the light source through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers)
  • It can be installed in a two-wire and three-wire configuration
  • Automatically calibrate the connected light source
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-009 | Walli Dimmer FIBARO smart dimmer
FIBARO-009 FGWDEU-111

Walli Dimmer FIBARO smart dimmer. Designed to control the light source through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers). It can be installed in a two-wire and three-wire configuration. Automatically calibrate the connected light source. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-010 | Walli Outlet FIBARO smart electrical outlet
FIBARO-010 FGWOF-011
  • Walli Outlet FIBARO smart electrical outlet
  • Designed to control electrical devices through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Allows you to turn on / off the connected device remotely
  • Version for type F plug
  • Shows the current load by means of a multicolour LED frame (with FIBARO cover plate)
  • Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption
  • It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-010 | Walli Outlet FIBARO smart electrical outlet
FIBARO-010 FGWOF-011

Walli Outlet FIBARO smart electrical outlet. Designed to control electrical devices through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Allows you to turn on / off the connected device remotely. Version for type F plug. Shows the current load by means of a multicolour LED frame (with FIBARO cover plate). Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption. It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-011 | Z-Wave HOME CENTER 3 LITE FIBARO controller
FIBARO-011 FGHCL3
  • Z-Wave HOME CENTER 3 LITE FIBARO controller
  • It can connect to other Z-Wave devices
  • The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds
  • The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger
  • Remote control of the home from applications for phones, tablets and smart watches
  • Automatic scenarios: grouping of devices, schedules and scenes
  • Control devices with a button or remote control
  • It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations
  • The FIBARO system can only be controlled by voice commands
  • FIBARO integrates with Google Assistant and Amazon Alexa.
FIBARO-011 | Z-Wave HOME CENTER 3 LITE FIBARO controller
FIBARO-011 FGHCL3

Z-Wave HOME CENTER 3 LITE FIBARO controller. It can connect to other Z-Wave devices. The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds. The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger. Remote control of the home from applications for phones, tablets and smart watches. Automatic scenarios: grouping of devices, schedules and scenes. Control devices with a button or remote control. It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations. The FIBARO system can only be controlled by voice commands. FIBARO integrates with Google Assistant and Amazon Alexa.

FIBARO-002 | Remotely controlled Dimmer 2 FIBARO light dimming module
FIBARO-002 FGD-212
  • Remotely controlled Dimmer 2 FIBARO light dimming module
  • Designed to work with various types of light sources
  • Can be used as a switch with non-dimmable light sources
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Advanced microprocessor control
  • Intelligent light source detection algorithm implemented
  • Automatic setting of the control mode appropriate to the connected load
  • Active power and energy measurement functionality
  • Soft start function
  • Memory of the last light level settings
  • It works with various types of switches: momentary, toggle, three-way, etc
  • Active element: semiconductor electronic switch
  • To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations FGD-212 is an extension unit
FIBARO-002 | Remotely controlled Dimmer 2 FIBARO light dimming module
FIBARO-002 FGD-212

Remotely controlled Dimmer 2 FIBARO light dimming module. Designed to work with various types of light sources. Can be used as a switch with non-dimmable light sources. Compatible with any Z-Wave or Z-Wave Plus controller. Advanced microprocessor control. Intelligent light source detection algorithm implemented. Automatic setting of the control mode appropriate to the connected load. Active power and energy measurement functionality. Soft start function. Memory of the last light level settings. It works with various types of switches: momentary, toggle, three-way, etc. Active element: semiconductor electronic switch. To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations FGD-212 is an extension unit

FIBARO-003 | Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
FIBARO-003 FGR-223
  • Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
  • Based on Z-Wave 5 technology
  • Works with single phase AC
  • Provides precise positioning of blinds, awnings or doors
  • Incorporates power measurement function when used with a FIBARO Home Center
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption
  • Supports blind motors with mechanical and electrical limit switches
  • It works on the basis of advanced microprocessor control
  • It allows to measure the active power and the total energy consumption
  • It works with different types of buttons: monostable, bistable and roller blinds
  • Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards.
FIBARO-003 | Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates
FIBARO-003 FGR-223

Shutter 3 FIBARO module for remote control of motorized blinds, venetian blinds, awnings and gates. Based on Z-Wave 5 technology. Works with single phase AC. Provides precise positioning of blinds, awnings or doors. Incorporates power measurement function when used with a FIBARO Home Center. Compatible with any Z-Wave or Z-Wave Plus controller. Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption. Supports blind motors with mechanical and electrical limit switches. It works on the basis of advanced microprocessor control. It allows to measure the active power and the total energy consumption. It works with different types of buttons: monostable, bistable and roller blinds. Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards.

FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213
  • FIBARO Switch-2 module for remote control of an electrical device
  • Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled
  • It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch
  • Equipped with an active power and energy consumption measurement function
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Advanced microprocessor control
  • Active power and energy measurement functionality
  • It works with various types of switches (momentary, toggle, three-way, etc.)
  • To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations
FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213

FIBARO Switch-2 module for remote control of an electrical device. Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled. It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch. Equipped with an active power and energy consumption measurement function. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Advanced microprocessor control. Active power and energy measurement functionality. It works with various types of switches (momentary, toggle, three-way, etc.). To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations

FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214
  • Smart Module Smart Module FIBARO remote control
  • Designed to turn a device or circuit on and off
  • It allows to control the devices through the Z-Wave network or with buttons connected directly to them
  • It works with various types of switches and buttons
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)
FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214

Smart Module Smart Module FIBARO remote control. Designed to turn a device or circuit on and off. It allows to control the devices through the Z-Wave network or with buttons connected directly to them. It works with various types of switches and buttons. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)

FIBARO-006 | FIBARO Smoke Sensor
FIBARO-006 FGSD-002
  • FIBARO Smoke Sensor
  • Optical and universal Z-Wave smoke detector
  • Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor)
  • Designed to be mounted on a wall or ceiling
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Extremely easy installation
  • Battery operation
  • 3 levels of sensitivity
  • Built-in case opening detection
  • The alarm is signaled with sound, visual indicator and Z-Wave control command
  • Programmable over-temperature warning
  • Self test performed every 10 seconds
FIBARO-006 | FIBARO Smoke Sensor
FIBARO-006 FGSD-002

FIBARO Smoke Sensor. Optical and universal Z-Wave smoke detector. Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor). Designed to be mounted on a wall or ceiling. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Extremely easy installation. Battery operation. 3 levels of sensitivity. Built-in case opening detection. The alarm is signaled with sound, visual indicator and Z-Wave control command. Programmable over-temperature warning. Self test performed every 10 seconds

FIBARO-007 | FIBARO CO Sensor
FIBARO-007 FGCD-001
  • FIBARO CO Sensor
  • Z-Wave carbon monoxide detector
  • Ultralight, compact and battery powered
  • Equipped with a temperature sensor
  • Compatible with any Z-Wave or Z-Wave Plus Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Designed to mount on the wall
  • Completely via radio
  • Built-in siren and LED diode.
FIBARO-007 | FIBARO CO Sensor
FIBARO-007 FGCD-001

FIBARO CO Sensor. Z-Wave carbon monoxide detector. Ultralight, compact and battery powered. Equipped with a temperature sensor. Compatible with any Z-Wave or Z-Wave Plus Controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Designed to mount on the wall. Completely via radio. Built-in siren and LED diode.

FIBARO-008 | Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
FIBARO-008 FGWPF-102
  • Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
  • It works with any device with an output power of up to 2500W
  • Compatible with any Z-Wave controller
  • Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher)
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher)
  • Advanced microprocessor control
  • Executive element: relay
  • Active power and energy measurement functionality
  • Compact and elegant housing
  • Simple installation - just plug it in
FIBARO-008 | Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
FIBARO-008 FGWPF-102

Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form. It works with any device with an output power of up to 2500W. Compatible with any Z-Wave controller. Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher). Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher). Advanced microprocessor control. Executive element: relay. Active power and energy measurement functionality. Compact and elegant housing. Simple installation - just plug it in

FIBARO-009 | Walli Dimmer FIBARO smart dimmer
FIBARO-009 FGWDEU-111
  • Walli Dimmer FIBARO smart dimmer
  • Designed to control the light source through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers)
  • It can be installed in a two-wire and three-wire configuration
  • Automatically calibrate the connected light source
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-009 | Walli Dimmer FIBARO smart dimmer
FIBARO-009 FGWDEU-111

Walli Dimmer FIBARO smart dimmer. Designed to control the light source through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers). It can be installed in a two-wire and three-wire configuration. Automatically calibrate the connected light source. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-010 | Walli Outlet FIBARO smart electrical outlet
FIBARO-010 FGWOF-011
  • Walli Outlet FIBARO smart electrical outlet
  • Designed to control electrical devices through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Allows you to turn on / off the connected device remotely
  • Version for type F plug
  • Shows the current load by means of a multicolour LED frame (with FIBARO cover plate)
  • Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption
  • It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-010 | Walli Outlet FIBARO smart electrical outlet
FIBARO-010 FGWOF-011

Walli Outlet FIBARO smart electrical outlet. Designed to control electrical devices through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Allows you to turn on / off the connected device remotely. Version for type F plug. Shows the current load by means of a multicolour LED frame (with FIBARO cover plate). Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption. It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-011 | Z-Wave HOME CENTER 3 LITE FIBARO controller
FIBARO-011 FGHCL3
  • Z-Wave HOME CENTER 3 LITE FIBARO controller
  • It can connect to other Z-Wave devices
  • The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds
  • The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger
  • Remote control of the home from applications for phones, tablets and smart watches
  • Automatic scenarios: grouping of devices, schedules and scenes
  • Control devices with a button or remote control
  • It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations
  • The FIBARO system can only be controlled by voice commands
  • FIBARO integrates with Google Assistant and Amazon Alexa.
FIBARO-011 | Z-Wave HOME CENTER 3 LITE FIBARO controller
FIBARO-011 FGHCL3

Z-Wave HOME CENTER 3 LITE FIBARO controller. It can connect to other Z-Wave devices. The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds. The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger. Remote control of the home from applications for phones, tablets and smart watches. Automatic scenarios: grouping of devices, schedules and scenes. Control devices with a button or remote control. It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations. The FIBARO system can only be controlled by voice commands. FIBARO integrates with Google Assistant and Amazon Alexa.