STOCK:

Shutter 3 FIBARO module for remote control of motorized blinds FIBARO-003

FGR-223
  • Specifications

  • Radio protocol: Z-Wave (500 series chips)

  • Radio frequency: 868.4MHz, 869.8MHz (EU)
  • Radio signal strength: up to 6 dBm
  • Distance: up to 50 meters outdoors, up to 30 meters indoors (depending on building materials)
  • Compatible Motor Type: Single Phase AC Motors
  • Compatible with all VESTA panels (Z-Wave)
  • Necessary limit switches: electronic and mechanical

  • Active element: micro-gap relay switch μ
  • Power supply: 100V ~ 240V AC, 50 / 60Hz
  • Rated load current: 1.7A (inductive loads) / 4.2A (resistive loads)
  • Consumption: up to 0.8W
  • Operating temperature: 0 ° C ~ + 35 ° C
  • Relative humidity: 10% ~ 95% (non-condensing)
  • Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm
  • To install in boxes: Ø≥50 mm, depth ≥60 mm
  • EU Directives: RED 2014/53 / EU, RoHS 2011/65 / EU

SIMILAR PRODUCTS

FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214
  • Smart Module Smart Module FIBARO remote control
  • Designed to turn a device or circuit on and off
  • It allows controlling the devices through the Z-Wave network or with buttons connected directly to them
  • It works with various types of switches and buttons
  • Compatible with all VESTA panels (Z-Wave)
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)
FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214

Smart Module Smart Module FIBARO remote control. Designed to turn a device or circuit on and off. It allows controlling the devices through the Z-Wave network or with buttons connected directly to them. It works with various types of switches and buttons. Compatible with all VESTA panels (Z-Wave). Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)