STOCK:

Smart Module Smart Module FIBARO for remote control of 1 device or electrical circuit FIBARO-005

FGS-214
  • Specifications

  • Radio protocol: Z-Wave (500 series chips)

  • Radio frequency: 868 ~ 868.6MHz, 869.7 ~ 870MHz
  • Radio signal strength: +5 dBm
  • Distance: up to 50 meters outdoors, up to 40 meters indoors (depending on building materials)
  • Compatible with all VESTA panels (Z-Wave)
  • Active element: micro-gap μ relay
  • Maximum cable length: 3 meters
  • Recommended wire cross-sectional area: 0.2 ~ 2mm2 (24–14 AWG) (depending on load current)
  • Power supply: 100V ~ 240V AC, 50 / 60Hz / 24V ~ 30V DC
  • Rated load current: 6.5A
  • Supported Charge Types: Resistive and Incandescent
  • Operating temperature: 0 ° C ~ + 35 ° C
  • Relative humidity: 0% ~ 95% (non-condensing)
  • Installation and use classification: Automatic electrical control for use in household equipment or similar
  • Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm
  • EU Directives: 2011/65 / EU, 2015/863, 2014/53 / EU

SIMILAR PRODUCTS

FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213
  • FIBARO Switch-2 module for remote control of an electrical device
  • Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled
  • It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch
  • Equipped with an active power and energy consumption measurement function
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Advanced microprocessor control
  • Active power and energy measurement functionality
  • It works with various types of switches (momentary, toggle, three-way, etc.)
  • To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations
FIBARO-004 | FIBARO Switch-2 module for remote control of an electrical device
FIBARO-004 FGS-213

FIBARO Switch-2 module for remote control of an electrical device. Designed to be installed in standard wall switch boxes or anywhere else electrical devices need to be controlled. It allows you to control connected devices, either through the Z-Wave Plus network or through a directly connected switch. Equipped with an active power and energy consumption measurement function. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Advanced microprocessor control. Active power and energy measurement functionality. It works with various types of switches (momentary, toggle, three-way, etc.). To be installed in wall switch boxes of dimensions that allow installation, in accordance with the provisions of the applicable regulations