Notifier SharpEye 40/40 series flame detector with Quad-Sense multispectrum

Technical features

• SharpEye 40/40 Series Quad-Sense Multi-Spectrum Flame Detector
• IR3 + Hydrogen technology
• Integration of 4 IR sensors to differentiate flame sources from non-flame background radiation
• Detection of hydrogen, hydrocarbon and gas fires
• Typical response time less than 5 seconds
• Immunity to false alarms
• MTBF reliability of 150,000 hours
• 5 levels of sensitivity
• Intelligent field of view integrity test
• Built-in BIT for Lens and electronic circuit integrity validation
• Plug-and-Play factory calibration for immediate use in fire detection systems
• Lens Two-mode heated for demanding environmental conditions

Detection

• 2830 m² detection coverage
• Spectral response in 4 infrared bands: 4 µm, 4.4 µm, 4.5 µm and 5 µm
• Field of view for hydrogen: horizontal 90° and vertical 90°.
• Field of view for other fuels: horizontal 80° and vertical 80°.
• Detection range for gasoline and n-heptane up to 65 m (65 ft)
• Lithium-ion battery detection range up to 61 m (200 ft)
• Solvents, butyl acrylate and vinyl acetate detection range up to 54 m (54 ft)
• Detection range of diesel, methane, LPG, kerosene, Jet fuel JP5, Jet fuel A1, mineral oil and cooking oil up to 45 m (150 ft)
• Hydrogen detection range up to 38 m (100 ft)
• Detection range of office paper and wood up to 25 m (82 ft)

Inputs and outputs

• Alarm, fault and auxiliary relays
• Analog voltage output: 0 V on analog port fault, 2 V on normal state and 5 V on alarm/explosion
• 0-20 mA stepped analog output
• HART protocol on analog current 0-20 mA for maintenance, configuration changes and asset management
• RS-485 communication compatible with Modbus
• Electrical interface with 17 terminals and one wiring option
• Cable entries 2 x M25 x 1.5 mm ISO

Power supply

• Nominal operating voltage 24 Vdc
• Operating voltage range 18 to 32 Vdc
• Standby consumption max. 3 W
• Standby power consumption max. 8 W with heated window
• Consumption in alarm maximum 4.2 W
• Consumption in alarm maximum 9.6 W with heated window
• Electrical input protection according to EN50130
• EMI/RFI protection according to EN61000-6-3 and EN50130

Environmental

• Operating temperature -40 °C to +75 °C (-40 °C to +75 °C)
• Storage temperature -40 °C to +75 °C (-40 °F to +75 °C)
• Relative humidity non-condensing up to 100%.
• Environmental standard DNV 2-4
• Water and dust protection IP66 and IP68 according to EN60529
• NEMA 250 6P

Physical characteristics

• Copper-free reinforced aluminum housing with polyurethane paint finish
• Wall mounting bracket included
• 316 stainless steel tilt bracket material with electropolished finish
• Detector dimensions 100.6 x 117 x 155 mm (100.6 x 117 x 155 mm)
• Detector weight 1.3 kg
• Tilting bracket weight 1,1 kg

Certifications and standards

• ATEX
• EN54-10 VdS
• IEC61508, SIL3 compliant

Contents

• NOTIFIER-829 flame detector (40/40CM641ACY7)
• Wall mounting bracket
• ABS protective cover