OPTEX TXI series battery-operated PIR curtain detector with microwave, anti-masking and 12 m range for outdoor use

Technical features

• Outdoor curtain detector for height mounting
• TXI series battery-powered model
• Detection method: PIR passive infrared and microwave
• Detection area of 12 m x 2.4 m (40 ft x 8 ft)
• Mounting height from 2.2 to 4.0 m (8 to 15 ft.)
• Warm-up period of 60.0 ± 0.5 s
• Red LED selectable ON/OFF

Functionalities

• Triple AND logic with area optimized design
• Dual PIR and microwave technology
• Integrated anti-masking
• Design to reduce false alarms caused by small animals and ambient light
• Detection distance adjustable in 3 levels by means of included plates
• Bottom zone selectable ON/OFF via bottom lever
• Horizontal adjustment: left, front or right
• SMDA digital temperature compensation

Communication interface

• Self-powered detector ready for integration into radio systems via compatible RF transmitter
• Internal space reserved for installation of alarm system RF transmitter
• RF transmitter not integrated as standard

Alarms

• Designed to detect intruders and activate an alarm control panel
• Alarm period of 2.0 ± 0.5 s
• Warm-up indication: flashing for 60 s
• Alarm indication: on for 2 s
• Masking detection indication: 3 flashes repeatedly
• End of step test mode indication: fast flashing for 5 sec.
• Alarm output via solid-state switch, 10 V DC 0.01 A max.
• Fault output with tamper open on removal of cover or main unit and by masking detection
• Accelerometer for tamper

Power supply

• 3.0 V DC power supply
• 19 µA consumption at standby
• Maximum consumption 6 mA at 3.0 VDC

Environmental

• IP55 protection
• Operating temperature from -20°C to +45°C (-4°F to +40°F)
• Maximum ambient humidity 95%
• RF Interference: no alarm at 10 V/m

Physical Characteristics

• Dimensions: 119.5 x 54.4 x 70.2 mm
• Approximate weight 155 g
• Wall mount with side and rear brackets included
• Wall or ceiling mount with optional bracket TXI-BKT
• Compatible with concealed and exposed wiring via included bracket

Contents

• 2 mounting screws
• 2 connecting screws
• 1 side bracket
• 1 rear bracket
• 1 area adjustment plate 1
• 1 area adjustment plate 2
• 1 connector