- ALARM.COM Systems
- VESTA Alarm
- VESTA Medical Alarm
- DAHUA systems
- U-PROX Systems
- Pyronix / HIKVISION systems
- HONEYWELL® systems
- PARADOX® systems
- VISONIC® systems
- DSC® systems
- DIY Home system alarm GRADE 1
- Alarm Transmission & Reception
- Volumetric Detectors
- Shock and Impact Detectors
- Magnetic Contacts
- Special Detectors
- Perimeter Detection
- Sirens
- Anti-theft protection by fog
- Proactive safety smoke
- Cables
- Accessories
OPTEX-151
ViiK vehicle detection sensor
OPTEX-151
OVS-01GT
- MAIN FEATURES
- SPECIFICATIONS
- DOCUMENTATION
- COMMENTS
- Optex ViiK vehicle detection sensor
- Above ground vehicle sensor: no civil engineering work required
- Combined FMCW (microwave) and ultrasonic dual technology detection
- Designed for activation of automatic gates, barriers or industrial doors
- Detects vehicles at speeds up to 20 km/h.
Dual technology vehicle detection sensor designed to be used in conjunction with an automatic gate, barrier or industrial gate. Sensor mounted on the ground, it detects a vehicle arriving at a speed of 2 to 20 km/h until it stops. Vehicle detection is guaranteed thanks to the combination of microwaves and ultrasonic waves. In many cases, it can replace a ground loop sensor or video-based sensors.
Specifications
- Detection method: Combination of microwaves (Doppler shift and FMCW) and ultrasonics
- Frequency: 24GHz (microwave), 56kHz (ultrasonic)
- Microwave detection range: 0.8 ~ 5.5 meters programmable range
- Ultrasonic detection range: 0.1 ~ 1 meter programmable range
- Response time: 500 ms
- Vehicle speed to be detected: 2 ~ 20 km/h
- Sensitivity adjustable in 5 levels
- Adjustable presence detection timer
- Relay output: 30V DC, 0.3A (NO/NC switchable)
- Switchable active low/high input
- Power supply: 12V ~ 24V DC
- Consumption: Up to 200 mA at 24V DC (heater on), up to 80 mA at 24V DC (heater off)
- Operating temperature: -30°C ~ +50°C (-30°F ~ +50°F)
- Operating Humidity: Up to 95% (non-condensing)
- Indoor and outdoor installation environment
- Degree of protection IP65
- Installation height of 500 mm from the floor to the base of the detector
- Horizontal angle adjustment: ±30° (5° steps)
- Dimensions: 80 (W) x 175 (H) x 72,5 mm
- Weight: 480 g (including accessories)
REFERENCE / MODEL | OPTEX-151 / OVS-01GT |
---|---|
Audio | No |
Ingress protection | IP65 |
Special Protection | No |
Relays | 1 output |
Installation environment | Indoor || Outdoor |
Similar Products