MOBOTIX M ONE 8MP IP camera with 95° fixed lens, IR and AI for outdoor use

Technical Specifications

• MOBOTIX M ONE Series IP Camera with Fixed Lens for Indoor and Outdoor Use
• Image sensor up to 4K UHD 3840x2160, 16:9, 1/1.8"
• Maximum resolution: 8MP (3840x2160)
• Fixed lens 5 mm B050 lens with F1.8 aperture
• Field of view: 95° horizontal and 50° vertical
• Color sensor sensitivity: 0.1 lx at 1/60 s and 0.005 lx at 1 s
• B/W sensor sensitivity: 0.02 lx at 1/60 s and 0.001 lx at 1 s
• 2 built-in 850 nm IR LEDs with a range of up to 30 m
• Manual and automatic exposure control from 1 s to 1/16,000 s

Video

• H.264, H.265, MxPEG+, and MJPEG compression
• Resolutions: VGA, XGA, HD, Full HD, QHD, and 4K UHD
• Up to 30 fps in 4K with H.264/H.265 and 20 fps in 4K with MxPEG
• H.264 and H.265 multistreaming
• Multicast streaming via RTSP

Functionalities

• WDR up to 120 dB
• Digital pan, tilt, and zoom (vPTZ) up to 8x
• Programmable exposure zones
• Continuous, event-triggered, and flexible time-based recording
• Snapshot recording with pre- and post-alarm images
• Weekly schedule for recordings and actions
• Transfer of event videos and images via FTP and email
• Playback and QuadView via web browser
• Master/slave functionality and privacy zone programming
• Digitally signed firmware to prevent tampering

Smart features

• Integrated MOBOTIX ActivitySensor with AI-based object recognition
• MxActivitySensor versions 1.0, 2.1, and 3.0 with AI Motion and Loitering Detection
• Video motion detection

Audio

• Built-in microphone
• Integrated 0.9 W speaker at 8 ohms
• 1 built-in audio output
• Optional external speaker

Storage

• 64 GB internal microSD card installed
• Internal storage expandable up to 1 TB
• Recording to external USB and NAS devices
• MxFFS with buffered recording, pre- and post-alarm images, and storage monitoring

Alarms

• 1 alarm input and 2 alarm outputs
• Input via contact closure or up to 30 Vrms AC / 50 V DC
• Output with pull-up resistor and external power supply of 10 mA / max. 50 V DC
• Shock detector for tamper detection
• Remote notification via email, network message, SNMP, MxMessageSystem, and MQTT

Communication interface

• USB 2.0 via USB-C connector
• Power input: 12–24 V DC
• Integrated input/output
• Output for external speaker

Network

• 1 RJ45 1000BaseT Ethernet port for network connection
• Compatible with ONVIF profiles G, S, and T
• Protocols: DHCP, DNS, ICMP, IGMP v3, IPv4, IPv6, HTTP, HTTPS, FTP, FTPS, NFS, NTP, MQTT, RTP, RTCP, RTSP, SFTP, SIP, SMB/CIFS, SNMP, SMTP, SSL/TLS 1.3, TCP, UDP, VLAN, VPN, and Zeroconf/mDNS
• Integration with the Genetec protocol
• HTTP-API programming interface
• Compatible with MOBOTIX HUB, MxManagementCenter, MOBOTIX Cloud Streaming & Events, and the MOBOTIX LIVE App

Power

• Power via IEEE 802.3af Class 3 PoE or external 12/24 V DC power supply
• Maximum power consumption of 12.95 W
• Surge protection box available as an accessory (not included)

Environmental

• Indoor and outdoor use
• Operating temperature range: -40 to 65 °C
• Minimum cold start temperature of -25 °C
• Relative humidity of 95% non-condensing
• IP66 and NEMA 4X protection
• IK10 vandal-resistant rating for the housing (excluding the lens)
• Not designed for use in Ex hazardous areas

Physical Specifications

• White PBT-30GF housing
• Dimensions: 219 x 131 x 237 mm
• Weight: 0.973 kg
• Wall mounting by default
• Ceiling or pole mounting using an M26-compatible accessory
• 2AXIS: 180° horizontal and 110° vertical adjustment for wall or pole mounting
• 2AXIS: 360° horizontal and 110° vertical adjustment for ceiling mounting

Contents

• MOBOTIX M ONE MOBOTIX-84 IP Camera (Mx-ONE-M1A-S-8DN050)
• 50 cm Ethernet connection cable installed
• 64 GB SD card installed
• Important Safety Information
• Sticker with the camera’s EAN number
• Sticker with the camera’s IP address
• Yellow module key for M1A-S FIX
• Sealing ring for VarioFlex and wall mounts
• 5 white plastic screw caps
• 5 mm Allen wrench
• 4 stainless steel washers, Ø5.3 mm
• 4 wood screws, 4.5x60 mm
• 4 S8 wall anchors
• Pliers for replacing the SD card

Certifications and Standards

• EN 50121-4, EN 55032, EN 55035, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 62368-1, and EN 63000
• AS/NZS CISPR32 and 47 CFR Part 15b
• NDAA Compliant
• MTBF of 100,000 hours
• 5-year manufacturer’s warranty