Dahua Eureka Series hybrid thermal IP camera with 256×192 thermal and 4MP visible channels and fire detection for outdoor use

Technical Specifications

• Dahua Eureka Series Hybrid Thermal IP Camera with Dual Thermal and Visible Channels for Outdoor Use
• Uncooled vanadium oxide (VOx) focal-plane thermal sensor
• Thermal resolution of 256×192 pixels
• Thermal pixel size of 12 µm
• Spectral range: 8 to 14 µm
• Thermal sensitivity (NETD) ≤25,mK@F1.0
• Lens 10 mm fixed thermal lens with F1.0 aperture
• Thermal field of view: 17.3° horizontal and 13.1° vertical
• Minimum thermal focusing distance: 2 m
• 1/1.8" CMOS visible sensor
• 4MP (2688×1520) visible resolution
• Lens 12 mm fixed visible lens with F1.7 aperture
• Visible field of view: 37.3° horizontal and 21.4° vertical
• Minimum visible focus distance of 2.5 m
• Electronic shutter: 1/30,000 s to 1 s
• Minimum illumination: 0.05 lux in color and 0.005 lux in black and white
• 0 lux illumination with IR enabled
• IR range of up to 50 m
• Warm light range of up to 30 m
• Automatic or manual illumination control
• Visible-light signal-to-noise ratio ≥55 dB
• Thermal detection range of up to 417 m for people and up to 1,278 m for vehicles
• Thermal recognition range of up to 104 m for people and up to 319 m for vehicles
• Thermal identification range of up to 52 m for people and up to 160 m for vehicles

Video stream

• H.265, H.264, H.264H, and MJPEG compression
• Thermal Stream 1 with resolutions of 1280×960, 1024×768, 640×480, and 256×192
• Thermal Stream 2 with resolutions of 640×480 and 256×192
• Visible stream 1 with resolutions of 4MP (2688×1520), 1080P (1920×1080), 720P (1280×720), and 704×576
• Visible Stream 2 with resolutions of 720P (1280×720), 704×576, and CIF (352×288)
• Configurable frame rate from 1 to 25 fps at 50 Hz and from 1 to 30 fps at 60 Hz
• Default frame rate of 25 fps on primary streams and 15 fps on secondary streams

Functionalities

• Continuous 24/7 monitoring via thermal and visible channels
• Thermal and visible image fusion, disabled by default
• Digital Detail Enhancement (DDE) on the thermal channel
• 16-level thermal digital zoom
• 18 color palettes for thermal visualization
• Automatic or manual gain control (AGC)
• 2D NR and 3D NR digital noise reduction
• Automatic day/night mode via ICR, color, or black-and-white
• 120 dB WDR in the visible spectrum
• Backlight compensation (BLC)
• High-light Compensation (HLC)
• Automatic, manual, indoor, outdoor, tracking, streetlight, and natural white balance
• Image rotation: 0°, 90°, 180°, and 270°
• Active deterrence via white light alarms, red and blue lights, and audible alerts

Smart Features

• Xinghan large-scale artificial intelligence model to reduce false alarms
• Perimeter protection via line-crossing and intrusion detection
• Detection of entry, exit, and presence in configured areas
• Intelligent classification of people and vehicles
• Up to 10 perimeter protection rules distributed across 5 groups of 2 rules
• Fire detection with alarm generation
• Maximum fire detection distance of 123 m for a 0.2 × 0.2 m target under test conditions
• Detection of up to 16 fire points
• Hot and cold spot tracking
• Smoke detection
• Detection of people smoking
• Call detection
• Temperature measurement from -20°C to +150°C in low-temperature mode
• Temperature measurement from +100°C to +650°C in high-temperature mode
• Specified measurement accuracy of ±2°C / ±2%
• Up to 21 simultaneous temperature measurement rules using points, lines, and areas
• Operating ambient temperature for thermal measurement: -20°C to +50°C
• Thermal measurement distance from 4 to 16.7 m for targets measuring 0.1 × 0.1 m
• Thermal measurement distance of 8 to 33.4 m for targets measuring 0.2 × 0.2 m
• Thermal measurement range from 40 to 167 m for targets measuring 1 × 1 m

Audio

• Two built-in microphones
• 1 audio input
• 1 audio output
• Local audible alerts for active deterrence
• G.711a, G.711Mu, PCM, and AAC compression

Storage

• MicroSD slot supporting up to 256 GB (card not included)

Alarms

• 2 alarm inputs
• 2 alarm outputs
• Smart fire and smoke detection alarms
• Intrusion and line-crossing alarms
• Local deterrence via flashing lights and audible alerts

Communication interface

• 1 RS-485 interface

Network

• 10/100 Base-T RJ45 Ethernet port
• Protocols: HTTP, HTTPS, TCP, ARP, RTSP, RTP, UDP, RTCP, SMTP, FTP, DHCP, DNS, DDNS, PPPoE, IPv4, IPv6, SNMP, QoS, UPnP, NTP, Multicast, and SFTP
• ONVIF and CGI compatibility
• Dahua SDK available
• Up to 12 users
• Access via Internet Explorer 11 and later, Chrome 65 and later, and Firefox 65 and later
• Security via user authentication, MAC address binding, HTTPS, and IEEE 802.1X

Power

• 12 V DC (±20%) to 24 V DC or IEEE 802.3af PoE
• Baseline power consumption less than 5.3 W at 12 V DC with illuminators, speaker, alarm lights, and power output disabled
• Base power consumption of 6.5 W via PoE, without power output function
• Maximum power consumption less than 12 W at 12 V DC with illuminators, speaker, alarm lights, and power output enabled
• Maximum power consumption of 11.5 W via PoE, without power output function
• 12 V DC power output at ≤0.15 A available exclusively with DC power supply

Environmental

• Operating temperature range: -40°C to +65°C
• Storage temperature: -40°C to +70°C
• Operating humidity ≤95%
• IP67 protection against dust and water
• IK10 vandal-resistant rating
• Basic corrosion protection
• Coating tested in a neutral salt spray test for 240 hours

Physical Characteristics

• Compact design with dual thermal and visible channels
• Mounting via junction box or pole mount with optional accessories
• Dimensions: 233 × 97.6 × 99.8 mm
• Packaging dimensions: 337 × 146 × 136 mm
• Net weight ≤1.1 kg
• Gross weight ≤1.4 kg

Contents

• Dahua Eureka Series DAHUA-5618 Hybrid Thermal IP Bullet Camera (DHI-TPC-BF1241-TB10F12-DW-S8-V1)