PIR SOZ1-K AS+ CPR 2x1.5 mm² screened fire-resistant PH120 cable on a 500 m reel

Technical Specifications

• PIR SOZ1-K AS+ CPR Shielded Electrical Cable for Safety and Fire Protection Installations
• PIROFREN PH120 type with intrinsic fire resistance
• Cross-sectional area of 2x1.5 mm²
• Flexible, polished copper conductors, Class 5 per EN 60228
• Silicone insulation, cross-linked elastomer, type EI2
• Stranded conductors with concentric wiring
• Aluminum/polyester tape shield with tinned copper (CuSn) drain wire
• 100% shield coverage
• Halogen-free LSZH polyolefin jacket
• Rated voltage of 300/500 V AC
• Rated voltage: 450/750 V DC
• Test voltage: 2000 V AC
• Maximum short-circuit temperature of 250°C for 5 seconds
• Minimum bend radius of 10 times the outer diameter
• Electrical resistance of 13.3 Ω/km at 20°C
• Nominal capacitance of 150 pF/m

Functionalities

• Designed to maintain the integrity of electrical circuits during direct exposure to fire
• Suitable for safety and fire control systems
• PH120 fire resistance
• Fire resistance for 180 minutes at 750°C according to IEC 60331-21
• Fire resistance for 2 hours at 400°C (Class F400)
• No flame or fire spread
• Low emission of smoke and corrosive gases

Environmental

• Operating temperature range: -15°C to +90°C
• Water resistance AD5 according to HD 60364-5-51, with protection against water jets from all directions
• Oil resistance per ICEA S-73-532

Physical characteristics

• Red outer jacket
• Approximate outer diameter of 7.7 mm
• Approximate weight of 75 kg/km
• Supplied in 500-meter reels

Contents

• 500-meter reel of PIR SOZ1-K AS+ CPR 2x1.5 mm² shielded, red, fire-resistant PH120 DEM-921 (DEM-921) cable

Certifications and Standards

• Manufactured in accordance with UNE 211025
• CPR classification Cca-s1b, d1, a1 according to EN 50575
• Fire resistance PH120 according to IEC 60331-1, IEC 60331-2, EN 50200, and EN 50362
• Fire resistance CR1-C1 according to NF C-32-070
• Fire resistance for 180 minutes at 750°C according to IEC 60331-21
• Fire resistance F400 according to EN 12101-3
• No flame spread according to EN 60332-1-2 and IEC 60332-1-2
• No fire spread according to EN 50399
• Smoke transmittance greater than 60% according to EN 61034-2 and IEC 61034-1-2
• Halogen emission in accordance with EN 60754-1 and IEC 60754-1
• Gas acidity with pH ≥ 4.3 and conductivity ≤ 100 µS/cm in accordance with EN 60754-2 and IEC 60754-2
• AENOR Certificate of Performance 0099/CPR/B85/0257