- ALARM.COM Systems
- VESTA Alarm
- VESTA Medical Alarm
- DAHUA systems
- U-PROX Systems
- Pyronix / HIKVISION systems
- HONEYWELL® systems
- PARADOX® systems
- VISONIC® systems
- DSC® systems
- DIY Home system alarm GRADE 1
- Alarm Transmission & Reception
- Volumetric Detectors
- Shock and Impact Detectors
- Magnetic Contacts
- Special Detectors
- Perimeter Detection
- Sirens
- Anti-theft protection by fog
- Proactive safety smoke
- Cables
- Accessories
NOTIFIER-276
FAAST-LT suction system P / 2-channel analog loop / 2 ID60 and ID3000 compatible detectors
NOTIFIER-276
NFXI-ASD22-HS
- MAIN FEATURES
- SPECIFICATIONS
- DOCUMENTATION
- COMMENTS
- FAAST-LT suction system P / 2-channel analog loop / 2 ID60 and ID3000 compatible detectors
FAAST-LT system of smoke analysis by aspiration of 2 independent channels / IP65, with direct connection to the NOTIFIER loop model NFXI-ASD22-HS with built-in isolator and local supervised siren output for each channel, also includes a control module of 2 addresses (01-159) on the door to monitor power and / or flow failure and two VIEW point sensors with 9 alarm levels and sensitivity prealarms that can be parameterized from the analogue control unit.
- System information by means of a pendulum-shaped graphic bar with 9 air flow levels to verify that the air flows according to the requirements of EN54-20.
- Internal point detector that incorporates manual and automatic test functions and decadic addressing (01-159) easily replaceable.
- Internal record of 2,244 events.
- Principle of dust discrimination by AWACS ™ algorithms.
- Includes easy access internal filter (FL-IF) and ultrasonic flow sensor.
- Configuration via standard USB cable and PipeIQ LT software (included).
- Compatible with OPAL 159 + 159 protocols (shows speed / flow values per channel in Pearl) and clip 99 + 99 ID60 / ID3000.
- It has 2 sample pipe entries for each channel Max. 50 meters each, in a single line of 100 meters and 160 meters in T with up to 18 holes per channel in class C, 6 in class B and 3 in class A.
- Requires 24 Vdc power supply according to EN54-4. Maximum current consumption: 570 mA at 24 Vdc (without sirens (2 channels) and is supplied with software justifying design and PipeIQ LT configuration.
REFERENCE / MODEL | NOTIFIER-276 / NFXI-ASD22-HS |
---|---|
Loops | 2 |
Number of pipes | 2 |
Display | SI |