Remote power supply MAXPRO Intrusion

MPI's Remote Power Supply (RPS) is an intelligent add-on power supply. In the event that the total current usage by all modules connected to the control panel auxiliary output is exceeded, the RPS provides additional 12 VDC power outputs to those modules and peripherals that require additional power (e.g., door control modules, keypads, motion detectors, glass break detectors, buzzers, etc.). It also offers four programmable low-voltage activation outputs.

Specifications

• Input voltage: 14V DC nominal (13.56~14.5V DC)
• Standby current: 35 mA (not including auxiliary outputs)
• Maximum current: 35 mA (not including auxiliary outputs)
• Supports up to 2 x 12VDC sealed lead acid (SLA) batteries
• System includes load protection and reverse polarity connection
• Low battery voltage warning at 11.2V DC
• Deep battery discharge protection by disconnecting at 10.5V DC
• Minimum allowed battery voltage: 9.5 VDC
• 2 auxiliary outputs of nominal 13.8V DC (10.2V~14.4V DC) with max. 1.5A per output
• In case of failure, overvoltage protection will operate at 16.5V DC
• Low power failure at AUX output of 10.0V DC
• High power failure on AUX output of 14.5V DC
• All circuits are PTC power limited
• 4 undervoltage trip outputs
• Trip output voltage of 13.8V DC (0V DC if switched)
• Max. trip output current: Triggers 1 to 3 at 75 mA per output, trigger 4 at 250 mA
• Operating temperature from -10C ~ +50°C
• Indoor use only
• Maximum relative humidity 93% (non-condensing)
• Dimensions: 420 (W) x 157 (H) x 42 mm
• Weight: 250 g
• Complies with EN50131-3:2009 Grade 3 Environmental Class II, EN50131-6:2017 Type A