HONEYWELL® systems
- All categories
- ALARM.COM Systems139
- VESTA Alarm392
- VESTA Medical Alarm34
- DAHUA systems26
- U-PROX Systems67
- Pyronix / HIKVISION systems6
- HONEYWELL® systems92
- PARADOX® systems149
- VISONIC® systems2
- DSC® systems3
- DIY Home system alarm GRADE 117
- Alarm Transmission & Reception30
- Volumetric Detectors115
- Shock and Impact Detectors20
- Magnetic Contacts70
- Special Detectors4
- Perimeter Detection88
- Sirens17
- Anti-theft protection by fog32
- Proactive safety smoke2
- Cables19
- Accessories90
HONEYWELL-237
MAXPRO Intrusion Door Control Module 1 (1 door, up to 2 readers)
HONEYWELL-237
MPIDC1
Single door access control module. Connects to a Max Pro control panel. Provides access and egress to the protected premise. Adding more than one MPIDC1 module increases the number of access points and each communicates with a Control Panel via the IB2 communication bus.
Specifications
- MAXPRO Intrusion Door Control Module 1 (1 door, up to 2 readers)
- Uses high power bus line for star or parallel wiring up to 3.65 km (2 miles)
- Applicable as a single door controller with 2 readers (input/output)
- Reads HID 26, 32, 34, 35 and 48 bit, Mifare Classic 32 bit, Desfire 56 bit and EM4102 26 and 40 bit format cards
- Has relay contact for door control (12V DC, 1.5A)
- Door status input and push-button output available
- Power supply: 13.8V DC nominal (10V ~ 14.5V DC)
- Consumption: 60 mA standby, 185 mA with relay active
- Operating temperature -10°C ~ +50°C (-10°C ~ +50°C)
- Relative humidity 93% (non-condensing)
- Dimensions: 130 (W) x 86 x 26 mm
- Weight: 120 g