Optex Dual PIR + U-PROX Transmitter

Name: UPROX-BXS-R
SKU: UPROX-BXS-R
Price: 375.718 EUR
Availability: InStock
Rating: 5 (24 reviews)

UPROX-BXS-R

Main features

Dual PIR detector for outdoor side vision
Incorporates transmitter via radio UPROX-049 (U-Prox Wireport)
Coverage of 12m on each side
Can be connected to a CCTV camera for sending visual alarms
4 detection zones (2 on each side)
Adjustable detection range and sensitivity
Independent alarm outputs
Tamper tamper
IP55
Self-powered with lithium or alkaline batteries 3V~9V DC or from transmitter via radio.

Specifications

Dual side-view dual PIR detector for outdoor use.
Built-in 868MHz radio transmitter UPROX-049 (U-Prox Wireport)
Side view with dual sensor on each side
Can be connected to a CCTV camera to send a visual alarm when an intruder is detected
4 PIR technology: detection range, sensitivity and alarm output can be set independently on each side
12 meters coverage on each side
Adjustable angle to the wall at 0° or 3°.
2 detection zones on each side
Detection range adjustable in 5 levels (2.5/3.5/6/8.5/12 meters)
Mounting height of 0.8 ~ 1.2 meters
Adjustable sensitivity on each side (extremely high and normal)
SMDA (Super Multi-Dimension Analysis) processing logic against false alarms from vegetation and adverse weather factors
Quick closing of the front cover and automatic walk test (3 minutes duration) when closing the cover
Alarm relay right side: NC/NA (10V DC, 0.01A, single, right or general)
Alarm relay left side: NC/NA (10V DC, 0.01A, individual, left or general)
Fault/tamper output: NC/NA (10V DC, 0.01A)
Built-in rear tamper
Double conductive mesh protection
Built-in level for fast and accurate installation
Easy visual identification of all setting elements (marked in blue on the detector)
Quick opening by 90-degree turn of lower screw
Includes protected enclosure at the rear to house the radio transmitter
IP55 degree of protection
Operating temperature range -30°C ~ +60°C
Powered by 3V~9V DC lithium or alkaline batteries (not supplied)
Compatible batteries: CR123A x3, 1/2AA x3 or x6, CR2 x3
Battery holder: OPTEX-42 (RBB-01)
It is recommended to power from the transmitter battery via the radio transmitter used.
Maximum consumption: 8mA
Dimensions: 199.7 x 92.8 x 98.7 mm (199.7 x 92.8 x 98.7 mm)
Weight: 550 g