optex
OPTEX-165 | WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking
OPTEX-165WXS-RDAM-X5WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking

WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking

OPTEX-165

WXS-RDAM-X5

Main features

  • WX Shield series 180° panoramic wireless Double Technology detector for outdoor use with active LED antimasking
  • Adjustable range up to 12m, 180°
  • X band microwave
  • Adjustable microwave range
  • Independent right and left side detection
  • Advanced SMDA processing logic
  • 14 pairs of horizontal detection zones and 2/4 vertical layers
  • Adjustable left/right detection range and sensitivity
  • Left and right alarm outputs, fault/tamper output
  • IP55
  • Self-powered by lithium batteries.

Specifications

 

The WX Shield series is OPTEX's new bet for sensors with 180-degree panoramic detection, with flexibility in the distance and configuration of the detection area, as well as the option of low mounting (0.8-1.2 m) or high mounting ( 2 m), IR self-learning logic and anti-masking. Ideal for perimeter protection or flat roofs in residential or commercial installations. The WXS sensor is equipped with all the benefits of the Shield sensor category including double conductive mesh housing to avoid false alarms due to interference or intense light, automatic test mode and 5 year warranty. WXS-DRAM is the wireless model with dual technology (infrared and microwave). Wireless module and batteries not included.

Double technology and three-layer detection
The WXS series features a built-in microwave and infrared (PIR) algorithm that provides maximum detection stability; It is ideal for applications where there is strong sunlight or direct glare from cars onto the sensor. Panoramic 3-layer detection offers high reliability as the alarm will only be triggered when motion is detected by all 3 detection layers.

flexible installation height
The WXS outdoor sensors offer high or low mounting options offering a flexible detection area of ​​between 2.5 and 12 m. In the 2m high mount option, the volumetric detection area is 9m; high mounting is effective in preventing vandalism or lens masking.

Two independent left/right detection areas
In low mount, the WXS intrusion sensors have two independent detection areas 90 degrees to the left and right. Each of these areas can be configured independently for detection distance, sensitivity and independent alarm output, which is very useful for activating security cameras.

Screening analysis and animal immunity
WX Shield intrusion detection sensors are designed to be immune to pets and small animals, which means that the alarm is not activated by cats, dogs or birds, giving great stability to the detection area. In addition, the sensors have the multi-dimensional logic (SMDA) patented by OPTEX, which discards environmental changes such as vegetation, shade, etc. which gives great stability to the sensor.

 

Characteristic

Up to 12 meters, 180°, outdoor wireless PIR with anti-masking
Double technology (4 PIR + 2MW), three-layer detection and animal immunity
Low (0.8~1.2 meters) or high (2 meters) mounting option
Independent left/right detection and alarm output (ideal for CCTV)

specs

180° Panoramic Double Technology Detector for Outdoors
Panoramic three-layer detection: Triggers an alarm only when all three detection layers (upper and lower PIR sensors and microwave sensor) detect motion
Antimasking by active LED
Detection Method: Passive Infrared and Microwave
180° coverage angle
High mounting height: 2 meters
Low mounting height: 0.8 ~ 1.2 meters
14 pairs of horizontal detection zones and 2 vertical layers mounted between 0.8 and 1.2 meters high or 4 vertical layers mounted at 2 meters high
Fixed range of 9 meters mounted at 2 meters height
Adjustable range between 2.5 and 12 meters mounted between 0.8 and 1.2 meters high
Detection speed from 0.3 to 2 m/s
Adjustable left/right detection range between 2.5 and 12 meters (0.8 ~ 1.2m height)
Sensitivity from 2°C to 0.6m/s adjustable for each side individually
X band microwave frequency (10.525 GHz)
The microwave sensitivity can also be individually adjusted via a switch
Alarm period of 2.0 ± 1.0 sec.
Boot time of 60 seconds or less (once the LED lights up)
Digital IR anti-masking function self-learning function
Double conductive shield
Advanced SMDA (multidimensional analysis) processing logic
Right alarm relay: Individual, right or general, NC/NO selectable (solid state switch, 10V DC, 0.01A)
Left alarm relay: Individual, left or general, NC/NO selectable (solid state switch, 10V DC, 0.1A)
Fault output: NC (28V DC, 0.1A)
Tamper output: The tamper output is shared with the "TR" fault output.
Power: 3V ~ 3.6V DC (lithium batteries) /24 µA ~ 6 mA at 3V
Operating temperature -20°C ~ +45°C
Relative humidity up to 95%
Degree of protection IP55
Wall or pole mount
Includes bubble level to facilitate installation
Dimensions: 91.7 (W) x 201.5 (H) x 124.3 (D) mm
Weight: 770g

REFERENCE / MODEL OPTEX-165 / WXS-RDAM-X5
System Wireless
Detector type Dual tech || MW 10GHz
Immunity Anti-masking || Pet immune
Installation environment Outdoor
Coverage 10~15m

Documentation

Language Name Type Action
EN EN_OPTEX-165_data_sheetSelf-generated File
EN
OPTEX-165_certificate.pdfCertificate
EN
COMMERCIAL DOCUMENTATIONCommercial Documentation
EN
ManualManual
OPTEX-165Image
Self-generated File
Certificate
Commercial Documentation
Manual
Image

Comments

There are no comments for the product OPTEX-165.

RELATED PRODUCTS

SIMILAR PRODUCTS

Estimated Delivery: 1 To 5 Business Days (Depending On The Country)
Repair Services And Technical Support
No Worries: 15 Days Right Of Withdrawal
Secure Transaction
xs
sm
md
lg
xl