Nice M-Bar electromechanical automatic barrier for vehicle access control

Technical features

• Nice M-Bar electromechanical automatic barrier for vehicular access control
• Model with bar up to 3 meters
• 24 VDC motor with integrated control Gateway
• Adjustable operating time 2.5 s to 4 s
• Starting torque 100 Nm
• Maximum frequency 500 cycles/h in continuous use
• Durability of balancing spring assembly guaranteed up to 2,000,000 cycles
• Electromechanical limit switches and encoder motion control

Features

• Master-Slave function for barriers facing each other with synchronized movement
• Obstacle detection and control by motor absorption monitoring
• Automatic fault diagnostics with flashing sequence signaling
• Energy saving function through stand-by mode
• Manual lateral unlocking with metal key, installable on either side

Alarms

• STOP input for NC/NO contacts or resistive device 8.2 kΩ with self-learning

Communication interface

• BlueBUS output for connection of compatible devices, up to 10 units
• SM connector for radio receivers (SMXI/SMXIS, OXI and compatible families)
• 50 Ω antenna input for RG58 or similar type cable
• 2 dedicated inputs for magnetic loop detectors
• SbS, OPEN, CLOSE and HP SbS command inputs for NO contacts
• FLASH, LIGHT and OGI signaling outputs

Power supply

• Power supply 230 VAC 50/60 Hz
• Maximum peak consumption 150 W

Environmental

• Degree of protection IP54
• Operating temperature -20 °C to +55 °C
• Not suitable for highly acidic, saline or potentially explosive atmospheres.

Physical characteristics

• Robust structure for residential and industrial use
• Dimensions 400 x 299 x 1215 mm (H)
• Net weight: 80 kg

Contents

• Electromechanical automatic barrier NICE-056 (M3BARR10)
• Barrier cover and support
• 2 boxes for photocells
• 300 mm aluminum connector (depending on M3BAR version)
• Fixed bar plug and connectors for rubber protections, with and without protection
• Manual unlocking and locking keys, cover locking key and hardware
• Foundation plate
• 4 anchor bolts

Certifications and standards

• Directive 2006/42/EC (Machinery)
• Directive 2014/53/EU (Network)
• Standards cited: EN 62479:2010, EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013, EN 301 489-1 V2.2.0:2017, EN 301 489-3 V2.1.1.1:2017, EN 300 220-2 V3.1.1:2017, EN 60335-1:2012+A11:2014, EN 62233:2008, EN 60335-2-103:2015, EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011