IOT SmartHome

NEWS

ZK-256 AQD-U
ZK-256 | undefined
ZK-256 AQD-U

ZK-246 AQD-Mini
Only in online store
Offer
until 30/04/2021
ZK-246 | undefined
ZK-246 AQD-Mini

ZK-254 AQD-V43-A
Only in online store
Offer
until 30/04/2021
ZK-254 | undefined
ZK-254 AQD-V43-A

ZK-253 AQD-WM1700
Only in online store
Offer
until 30/04/2021
ZK-253 | undefined
ZK-253 AQD-WM1700

ZK-255 AQD-V43-W
Only in online store
Offer
until 30/04/2021
ZK-255 | undefined
ZK-255 AQD-V43-W

ZK-251 AQD-L100
Only in online store
Offer
until 30/04/2021
ZK-251 | undefined
ZK-251 AQD-L100

ZK-250 AQD-H35
Only in online store
Offer
until 30/04/2021
ZK-250 | undefined
ZK-250 AQD-H35

ZK-248 AQD-V43B
Only in online store
Offer
until 30/04/2021
ZK-248 | undefined
ZK-248 AQD-V43B

FIBARO-011 FGHCL3
  • Z-Wave HOME CENTER 3 LITE FIBARO controller
  • It can connect to other Z-Wave devices
  • The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds
  • The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger
  • Remote control of the home from applications for phones, tablets and smart watches
  • Automatic scenarios: grouping of devices, schedules and scenes
  • Control devices with a button or remote control
  • It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations
  • The FIBARO system can only be controlled by voice commands
  • FIBARO integrates with Google Assistant and Amazon Alexa.
FIBARO-011 | Z-Wave HOME CENTER 3 LITE FIBARO controller
FIBARO-011 FGHCL3

Z-Wave HOME CENTER 3 LITE FIBARO controller. It can connect to other Z-Wave devices. The FIBARO system will guarantee your safety and your loved ones: smoke detection, carbon monoxide detection, flood detection, functioning as a radio alarm system, cooperation with the existing wired alarm system and security companies, opening of emergency door, closing of blinds. The FIBARO system will help you to guarantee the right conditions for your health: humidity control, intelligent heating, measurement of air quality and the amount of dust, detection of dangerous gases, ventilation control, notifications in case of situations of danger. Remote control of the home from applications for phones, tablets and smart watches. Automatic scenarios: grouping of devices, schedules and scenes. Control devices with a button or remote control. It combines all the elements of the house in a single ecosystem. It is recommended for apartments and small home automation installations. The FIBARO system can only be controlled by voice commands. FIBARO integrates with Google Assistant and Amazon Alexa.

FIBARO-010 FGWOF-011
  • Walli Outlet FIBARO smart electrical outlet
  • Designed to control electrical devices through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Allows you to turn on / off the connected device remotely
  • Version for type F plug
  • Shows the current load by means of a multicolour LED frame (with FIBARO cover plate)
  • Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption
  • It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-010 | Walli Outlet FIBARO smart electrical outlet
FIBARO-010 FGWOF-011

Walli Outlet FIBARO smart electrical outlet. Designed to control electrical devices through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Allows you to turn on / off the connected device remotely. Version for type F plug. Shows the current load by means of a multicolour LED frame (with FIBARO cover plate). Supports Z-Wave network security modes: S0 with AES-123 encryption and S2 authenticated with PRNG-based encryption. It works as a repeater of the Z-Wave signal (all non-battery operated devices within the network will act as repeaters to increase the reliability of the network). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-009 FGWDEU-111
  • Walli Dimmer FIBARO smart dimmer
  • Designed to control the light source through the Z-Wave network
  • It measures the active power and the energy consumed by the controlled load
  • Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers)
  • It can be installed in a two-wire and three-wire configuration
  • Automatically calibrate the connected light source
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability)
  • Can be used with all Z-Wave Plus certified devices, including third-party devices
FIBARO-009 | Walli Dimmer FIBARO smart dimmer
FIBARO-009 FGWDEU-111

Walli Dimmer FIBARO smart dimmer. Designed to control the light source through the Z-Wave network. It measures the active power and the energy consumed by the controlled load. Compatible load types: resistive loads (conventional incandescent and halogen light sources), resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED), resistive-inductive loads (ferromagnetic transformers). It can be installed in a two-wire and three-wire configuration. Automatically calibrate the connected light source. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater (all non-battery powered devices within the network will act as repeaters to increase network reliability). Can be used with all Z-Wave Plus certified devices, including third-party devices

FIBARO-008 FGWPF-102
  • Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
  • It works with any device with an output power of up to 2500W
  • Compatible with any Z-Wave controller
  • Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher)
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher)
  • Advanced microprocessor control
  • Executive element: relay
  • Active power and energy measurement functionality
  • Compact and elegant housing
  • Simple installation - just plug it in
FIBARO-008 | Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form
FIBARO-008 FGWPF-102

Z-Wave compatible Wall-Plug FIBARO universal relay switch in plug adapter form. It works with any device with an output power of up to 2500W. Compatible with any Z-Wave controller. Compatible with any Z-Wave or Z-Wave Plus controller (firmware 3.2 or higher). Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher). Advanced microprocessor control. Executive element: relay. Active power and energy measurement functionality. Compact and elegant housing. Simple installation - just plug it in

FIBARO-007 FGCD-001
  • FIBARO CO Sensor
  • Z-Wave carbon monoxide detector
  • Ultralight, compact and battery powered
  • Equipped with a temperature sensor
  • Compatible with any Z-Wave or Z-Wave Plus Controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Designed to mount on the wall
  • Completely via radio
  • Built-in siren and LED diode.
FIBARO-007 | FIBARO CO Sensor
FIBARO-007 FGCD-001

FIBARO CO Sensor. Z-Wave carbon monoxide detector. Ultralight, compact and battery powered. Equipped with a temperature sensor. Compatible with any Z-Wave or Z-Wave Plus Controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Designed to mount on the wall. Completely via radio. Built-in siren and LED diode.

FIBARO-006 FGSD-002
  • FIBARO Smoke Sensor
  • Optical and universal Z-Wave smoke detector
  • Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor)
  • Designed to be mounted on a wall or ceiling
  • Compatible with any Z-Wave or Z-Wave Plus controller
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
  • Extremely easy installation
  • Battery operation
  • 3 levels of sensitivity
  • Built-in case opening detection
  • The alarm is signaled with sound, visual indicator and Z-Wave control command
  • Programmable over-temperature warning
  • Self test performed every 10 seconds
FIBARO-006 | FIBARO Smoke Sensor
FIBARO-006 FGSD-002

FIBARO Smoke Sensor. Optical and universal Z-Wave smoke detector. Designed to operate in confined spaces, under normal conditions (no smoke, dust, condensed water vapor). Designed to be mounted on a wall or ceiling. Compatible with any Z-Wave or Z-Wave Plus controller. Supports protected mode (Z-Wave network security mode) with AES-128 encryption. Extremely easy installation. Battery operation. 3 levels of sensitivity. Built-in case opening detection. The alarm is signaled with sound, visual indicator and Z-Wave control command. Programmable over-temperature warning. Self test performed every 10 seconds

FIBARO-005 FGS-214
  • Smart Module Smart Module FIBARO remote control
  • Designed to turn a device or circuit on and off
  • It allows to control the devices through the Z-Wave network or with buttons connected directly to them
  • It works with various types of switches and buttons
  • Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
  • Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)
FIBARO-005 | Smart Module Smart Module FIBARO remote control
FIBARO-005 FGS-214

Smart Module Smart Module FIBARO remote control. Designed to turn a device or circuit on and off. It allows to control the devices through the Z-Wave network or with buttons connected directly to them. It works with various types of switches and buttons. Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption. Works as a Z-Wave repeater (all non-battery powered devices will act as repeaters to increase network reliability)