Dual Optex dual PIR + VESTA transmitter

Specifications

Outdoor Side View Dual Dual PIR Detector
Side vision with dual sensor on each side
Includes radio transmitter F1 868MHz VESTA-271 (TX-OPT-BXS-F1-868)
Can be connected to a CCTV camera to send a visual alarm when an intruder is detected
4 PIR technology: detection range, sensitivity and alarm output can be set independently on each side
Coverage of 12 meters on each side
Angle with respect to the wall adjustable to 0° or 3°
2 detection zones on each side
Detection range adjustable in 5 levels (2.5/3.5/6/8.5/12 meters)
Mounting height of 0.8 ~ 1.2 meters
Adjustable sensitivity on each side (extremely high and normal)
SMDA (Super Multi-Dimension Analysis) processing logic against false alarms due to vegetation and adverse weather factors
Quick closing of the front cover, by pressure, and automatic walk test (3 minutes duration) when closing the cover
Right side alarm relay: NC/NA (10V DC, 0.01A, individual, right or general)
Left side alarm relay: NC/NA (10V DC, 0.01A, individual, left or general)
Fault/tamper output: NC/NO (10V DC, 0.01A)
Built-in rear tamper
Double conductive mesh protection
Built-in level for fast and accurate installation
Easy visual identification of all adjustment elements (marked in blue color on the detector)
Quick opening by turning the lower screw 90 degrees
Includes protected compartment at the back to house the radio transmitter
Degree of protection IP55
Operating temperature -30°C ~ +60°C
Powered by 3V~9V DC lithium or alkaline batteries (not included)
Compatible batteries: CR123A x3, 1/2AA x3 or x6, CR2 x3
Battery holder: OPTEX-42 (RBB-01)
It is recommended to power from the battery of the radio transmitter used
Maximum consumption: 8mA
Dimensions: 199.7 x 92.8 x 98.7mm
Weight: 550g