The QX Infinity (QXI) series is a family of dual-technology infrared sensors offering a wide 120° detection angle and 12m coverage. Its elegant and compact design makes QXI sensors an ideal model for any residential or commercial building, offering reliable motion detection, animal immunity and activation of CCTV camera alarm panels. OPTEX-176 (QXI-R) is the wireless model.
Adjustable mounting height
QXI outdoor intrusion detectors can be installed high - between 2.2m and 2.7m high - a multi-level volumetric detection pattern that allows you to ignore small animals. In environments with large animals, the sensor can be mounted between 0.8 and 1.2 m high, to ignore the passage of pets.
Detection pattern analysis to ignore false alarms
All QXI models are provided with an analysis logic called SMDA, which analyzes the detection pattern and changes in the environment, such as weather or vegetation movements, to discriminate noise and the cause of nuisance false alarms. . In addition, the entire QXI range is provided with a double conductive cover to filter interference due to light or electromagnetic.
Practical wireless technology
The QXI-R wireless sensor can be added to most wireless alarm systems and provides the benefit of quickly and effectively protecting access to premises or any other outside building. The housing can be adapted to most of the wireless transmitters available on the market.
Characteristic
12m, 120 degrees, PIR via radio for outdoor QUAD pyrosensor, two detection layers and good tolerance to small animals High mount (2.2-2.7m) or regular mount to ignore pets SMDA logic and double conductive jacket to minimize false alarms specs
PIR QUAD detector for outdoor wireless Detection Method: Passive Infrared 12 meter range 120° coverage angle PIR Zones: 40 zones (Multilevel), 18 zones (pet alley) Detection speed: 0.3~2m/s Sensitivity: 2°C at 0.6m/s Pet Alley: Remove bottom detection to ignore small animals Mounting height: 2.2 ~ 2.7 meters (multi-level), 0.8 ~ 1.2 meters (pet alley) Alarm period: 2 sec. (±0.5 sec.) Boot period: 60 sec. (approx.) Alarm output: NC/NO, selectable, solid state switch, 3V DC, 0.01A Fault (and tamper) output: NC/NO, selectable, solid state switch, 3V DC, 0.01A LED indicator: 1. Readiness, 2. Alarm, 3. End of walk test Power: CR123A battery (not included) 3V DC Current Draw: 9 μA hold, 11 mA maximum at 3V DC Operating temperature -40°C ~ +60°C Relative humidity up to 95% Degree of protection IP54 Wall mount (interior or exterior) Optional wall (OPTEX-37) and ceiling (OPTEX-38) brackets with horizontal and vertical adjustment Dimensions: 78 (W) x 144.5 (H) x 83.5 (D) mm Weight: 215g
