PIR-PID Xtralis® ADPRO PRO E-45 medium-long range PIR-PID gun 50 x 3.3 meters

The complete range of ADPRO E-Pir perimeter intrusion detectors (PID) are designed to provide outstanding reliability and accuracy. This new generation of PIRs evolved from Xtralis perimeter protection technology and the proven technology of the existing ADPRO PRO PIRs series. They utilize passive infrared (PIR) technology, combined with precision mirrored lenses, the latest digital signal processing (DSP) and environmentally adaptive circuitry, providing exceptional detection reliability while minimizing nuisance false alarms. ADPRO PRO E-Series detectors achieve unmatched performance even in unstable environmental conditions. The ADPRO E series PIR detectors are available in a variety of models to optimize the perimeter project according to needs, performance and budget.

Specifications

• Detection Principle: Mid-range curtain
• Nominal range of 50 x 3.3 meters
• 3.8° angle
• Dedicated sensor with 360Protect™ technology for detector zero zone protection with coverage from 1 meter behind the detector to 8 meters in front of it
• Spectral response of 8-14 μm, with dual filters
• HDPE filter, IR transmissive
• Single channel pyroelectric (differential) sensor
• Detection rate 0.2~5m/s
• 3 freely programmable alarm outputs: Main Zone Alarm, Zero Zone Alarm, Pulse Counter, Support Tamper, Cover Tamper, Detector Alignment Alarm, Antimasking Alarm, Fault Alarm (Power / Temperature / Heater)
• Internal LED indicator.
• Data interface: RS485 (9600 baud/sec).
• Rubber gasket for 4 x 5-8 mm and 4 x 1- 2 mm cables
• Screw terminals Ø0.255 - 1.29 mm; A: 0.05 - 1.31 mm2; AWG: 30 - 16
• Supply voltage: 10.5V ~ 30V DC, 24V AC, ±15%, self-sensing
• Supply current: 18 mA @ 12V DC, 12 mA @ 24V DC, 30 mA @ 24V AC
• Operating temperature from -20°C ~ +60°C
• Fully compensated over the entire operating temperature range
• Housing material: Luran® S (ASA)
• Degree of protection IP65
• Dimensions: 358 x 188 x 290 mm (358 x 188 x 290 mm)
• Weight: 1510 g
• Wall and pole mounting: cable bracket (CMB) included
• Designed to meet EN50131-1 / IEC 62642-1:2010 standards) Environmental classification (Class IV - Outdoor)
• Designed to meet European EN50606-x and IEC standards