Wi-Tek Gigabit managed PoE switch with 4 PoE++ ports and RJ45/SFP uplinks for DIN rail

Technical Specifications

• Wi-Tek Managed Gigabit PoE Switch for Demanding Environments
• 12 Gbps switching capacity
• Packet forwarding rate of 8.92 Mpps
• 2K MAC address table
• 16 KB packet buffer
• 9K Jumbo Frames
• 4 MB of flash memory
• Store-and-forward forwarding mode

Functionalities

• DIP switch for Extend, VLAN, and PD Alive modes
• Extend mode with data transmission and PoE power delivery up to 250 m on all PoE ports
• PD Alive with automatic detection and reset of disconnected PoE devices
• VLAN mode with isolation between PoE ports and communication only with uplink ports
• Automatic loop detection enabled by default
• Port configuration and statistics, storm control, mirroring, isolation, and bandwidth control
• Link aggregation supported only on downlink ports
• MAC search, static or filtered MAC, and MAC table
• VLAN member configuration and VLAN settings
• PoE configuration and management
• Monitoring via temperature and humidity sensors with associated alarms

Alarms

• Dedicated alarm output on the top panel
• Alarms for anomalies and data from the temperature and humidity sensor

Communication Interface

• Input for temperature and humidity sensor
• Reset button

Network

• 4 RJ45 PoE downlink ports at 10/100/1000 Mbps
• PoE ports 1–4 are compatible with IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt
• PoE assignment via 1/2(+), 3/6(-), 4/5(+), and 7/8(-)
• 1 10/100/1000 Mbps RJ45 uplink port
• 1 1000 Mbps SFP uplink slot
• Compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, and IEEE 802.3z
• ONVIF camera detection and automatic topology mapping
• Remote management via the Wi-Tek cloud platform and mobile app
• MQTT client and Wi-Tek device discovery table
• IP settings, user management, firmware updates, and configuration backup

Power

• PWR1/PWR2/PWR3 inputs: 12–48 V DC without PoE and 48–57 V DC with PoE
• Included 52 V DC, 1.25 A adapter with a maximum power rating of 65 W
• Maximum PoE power budget of 55 W with the included adapter connected to PWR3
• Maximum PoE budget of 160 W with an optional industrial adapter (not included) connected to PWR3
• Maximum PoE power budget of 300 W with an optional industrial adapter (not included) connected to PWR1/PWR2
• Standby power consumption: 9.4 W
• Operating temperature of the included adapter: 0 °C to 40 °C

Environmental

• Operating temperature: -30 °C to 65 °C
• Operating humidity: 10% to 90% RH, non-condensing
• Storage temperature: -40 °C to 70 °C
• Storage humidity: 5% to 95% RH, non-condensing

Physical Characteristics

• Fanless design
• DIN rail or wall mounting
• Dimensions: 50 x 119 x 165 mm
• Net weight: 0.6 kg

Contents

• 1 WITEK-0183 switch (WI-PCES306GF-H)
• 1 quick-start guide
• 1 set of mounting accessories
• 1 DIN rail mounting bracket
• 1 temperature and humidity sensor
• 1 power adapter
• 1 set of Phoenix terminals

Certifications and Standards

• CE, FCC, RoHS, UKCA, and RCM certifications
• ESD protection in accordance with IEC 61000-4-2 with ±8 kV contact discharge and ±15 kV air discharge
• Surge immunity in accordance with IEC 61000-4-5 with ±6 kV in common-mode and ±2 kV in differential-mode