Omada by TP-Link AX3000 Wi-Fi 6 GPON access point with 4 Gigabit ports, PoE Out and VoIP

Technical Specifications

• Omada by TP-Link GPON Wi-Fi 6 AX3000 Access Point for FTTR/FTTH Optical Networks
• Compatible with IEEE 802.11a/b/g/n/ac/ax
• Dual-band Wi-Fi at 2.4 GHz and 5 GHz
• Wireless speeds of up to 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz
• 2x2 MU-MIMO technology with 2 spatial streams per band
• Uplink and downlink OFDMA
• Modulation up to 1024-QAM
• Channel bandwidth of 20/40 MHz on 2.4 GHz and 20/40/80/160 MHz on 5 GHz
• 2 internal omnidirectional antennas with 4.5 dBi gain at 2.4 GHz
• 3 internal omnidirectional 5 dBi antennas at 5 GHz
• Maximum CE transmit power of 20 dBm at 2.4 GHz and up to 29 dBm at 5 GHz, depending on the subband
• Transmit power adjustment in 1 dB increments
• 1 Gbit of Flash memory and 2 Gbit of DRAM

Functionalities

• Integration into the Omada optical networking solution for point-to-multipoint (PtMP) environments
• Data, voice, VoIP, HD video, and wired and wireless connectivity over a single fiber
• Up to 128 associated wireless clients
• Up to 16 BSSIDs, 8 per band
• Compatible with Omada Mesh and Layer 2 802.11k/v/r roaming
• Band Steering to distribute clients across bands
• Beamforming for wireless signal optimization
• Airtime Fairness to optimize transmission time
• Automatic Channel Selection (ACS)
• WLAN optimization and detection of unauthorized access points
• Load balancing via associated client limits and RSSI thresholds
• Per-client speed limiting
• Guest network
• QoS via WMM, DSCP, and U-APSD
• Multicast-to-unicast conversion and multicast filtering
• WLAN scheduling and reboots
• Supports VLAN by SSID, dynamic VLAN, and management VLAN
• WPA/WPA2/WPA3-Personal and Enterprise security
• 802.1X and MAC-based authentication
• MAC filtering and access control lists (ACLs)
• PPSK with and without a RADIUS server
• Captive portal with authentication via password, vouchers, local users, SMS, RADIUS, and forms
• Compatible with external captive portal
• Support for SIP accounts for VoIP services via FXS port

Communication interface

• 1 GPON SC/APC optical port
• 1 RJ11 FXS port for VoIP telephony
• 1 reset button for factory reset and recovery mode
• 1 button to turn LED indicators on and off
• LED indicators for power, GPON status, FXS, LAN activity, and PoE power

Network

• 4 RJ45 Ethernet ports (10/100/1000 Mbps)
• 2 Gigabit ports with IEEE 802.3af PoE output
• Total PoE budget of 22.4 W
• PoE power of up to 15.4 W per port
• Integration with switches, gateways, OLTs, and ONUs from the Omada Optical Networking solution
• Centralized management via Omada Controller V5.15.24 or later
• Compatible with Omada App V4.25 or later
• Autonomous and controller-based management
• Automatic provisioning and device onboarding
• Compatible with SNMP v1, v2c, and v3
• SSH access
• Compatible with IPv4 and IPv6
• DHCP client and static IP configuration
• Supports LLDP, mDNS, and NTP
• Event logging and email alerts
• Firmware updates and configuration backup and restore
• Diagnostic tools: Ping, Traceroute, and packet capture

Power

• 53.5 V DC / 0.81 A power supply
• Power consumption of 20 W, excluding PoE output
• Idle power consumption: 5.85 W
• 802.3af PoE output: 53.5 V / 0.287 A per port, with a total budget of 22.4 W
• Automatic shutdown of PoE ports when power limits are exceeded

Environmental

• Operating temperature: 0°C to +40°C
• Storage temperature: -40°C to +70°C
• Operating humidity: 10% to 90%, non-condensing
• Storage humidity: 5% to 90%, non-condensing
• Maximum operating and storage altitude: 2,000 m
• 2.5 kV common-mode surge protection on Ethernet ports
• ESD protection: ±8.5 kV air discharge and ±4.5 kV contact discharge

Physical Characteristics

• Desktop or wall mounting
• Dimensions: 175 x 140 x 33 mm
• Net weight: 500 g
• Mounting bracket weight: 50 g
• Gross weight: 792 g

Contents

• 1 TPLINK-326 GPON Wi-Fi 6 AX3000 access point (EAP650GP-Desktop)
• 1 power adapter
• 1 multifunction base
• 1 mounting kit
• 1 installation guide

Certifications and Standards

• CE, FCC, NCC, RCM, and BSMI certifications
• Standards: IEEE 802.11a/b/g/n/ac/ax, IEEE 802.11e/i/k/v/r, IEEE 802.1X, IEEE 802.1Q, IEEE 802.3af, IEEE 802.3ab, and IEEE 802.3x
• ETSI EN 300 328 and ETSI EN 301 893 radio standards
• Electromagnetic compatibility EN 55032, EN 55035, EN 301 489-1, and EN 301 489-17
• Electrical safety: EN 62368-1 and IEC 62368-1
• RoHS compliance in accordance with Directives 2011/65/EU and (EU) 2015/863