NIEUWS

DEM-1337 | undefined
DEM-1337 DEM-1337
DEM-1337 | undefined
DEM-1337 DEM-1337

DEM-830 | undefined
DEM-830 DEM-830
DEM-830 | undefined
DEM-830 DEM-830

DEM-829 | undefined
DEM-829 DEM-829
DEM-829 | undefined
DEM-829 DEM-829

DEM-828 | undefined
DEM-828 DEM-828
DEM-828 | undefined
DEM-828 DEM-828

DEM-827 | undefined
DEM-827 DEM-827
DEM-827 | undefined
DEM-827 DEM-827

QAR-133A | Lithium AA battery, 3.6V, 2.6Ah
QAR-133A QAR-133A
  • Lithium AA battery, 3.6V, 2.6Ah
  • Automatic low discharge to extend battery life
  • Operating temperature -60°C ~ +85°C
  • Non-flammable
  • Corrosion-resistant
  • Low magnetic signature
QAR-133A | Lithium AA battery, 3.6V, 2.6Ah
QAR-133A QAR-133A

Lithium AA battery, 3.6V, 2.6Ah. Automatic low discharge to extend battery life. Operating temperature -60°C ~ +85°C. Non-flammable. Corrosion-resistant. Low magnetic signature

DEM-2193 | Alarmtech test device for glass break detectors and vibration detectors
DEM-2193 GVT 5000
  • Alarmtech test device for glass break detectors and vibration detectors
  • Generates test signals for GD 300/400 detectors and for 400 series detectors
  • Easy to use
  • Will not damage the object being tested
  • 12V Output is available.
DEM-2193 | Alarmtech test device for glass break detectors and vibration detectors
DEM-2193 GVT 5000

Alarmtech test device for glass break detectors and vibration detectors. Generates test signals for GD 300/400 detectors and for 400 series detectors. Easy to use. Will not damage the object being tested. 12V Output is available.

DEM-2192 | Magnetic surface contact
DEM-2192 MC 740-E
  • Magnetic surface contact
  • Slim design
  • GAP of 37 mm
  • Not recommended for use with magnetic materials
  • NC
  • 2 metres cable
  • White
  • EN50131-2-6 Grade 2.
DEM-2192 | Magnetic surface contact
DEM-2192 MC 740-E

Magnetic surface contact. Slim design. GAP of 37 mm. Not recommended for use with magnetic materials. NC. 2 metres cable. White. EN50131-2-6 Grade 2.

DEM-2002 | undefined
DEM-2002 MC 740P-BL
DEM-2002 | undefined
DEM-2002 MC 740P-BL

VESTA-269 | VESTA clamp meter
VESTA-269 CLMT-1ZW
  • VESTA clamp meter
  • Measures, monitors and reports the energy consumption of an entire household or apartment complex
  • Lightweight and easy to install in a standard electrical box or switch panel
  • Monitors the total amount of electricity used and generates an energy history for the day/week/month
  • High stability and sensitivity
  • LED status indicator
  • Over-the-air (OTA) firmware upgrade capability
  • Reports collected data to the control panel at regular intervals
  • Compatible with third-party Z-Wave systems
  • Z-Wave certified product
  • Suitable for residential and commercial premises.
VESTA-269 | VESTA clamp meter
VESTA-269 CLMT-1ZW

VESTA clamp meter. Measures, monitors and reports the energy consumption of an entire household or apartment complex. Lightweight and easy to install in a standard electrical box or switch panel. Monitors the total amount of electricity used and generates an energy history for the day/week/month. High stability and sensitivity. LED status indicator. Over-the-air (OTA) firmware upgrade capability. Reports collected data to the control panel at regular intervals. Compatible with third-party Z-Wave systems. Z-Wave certified product. Suitable for residential and commercial premises.

VESTA-271 | Optex transmitter via F1 868MHz radio
VESTA-271 TX-OPT-BXS-F1-868
  • Optex transmitter via F1 868MHz radio
  • BUS connection to the detector and radio transmission to the panel (F1)
  • The transmitter is installed inside the detector
  • Allows sending RF signals via radio to the control panel
  • Teach/test button
  • LED indicator
  • Sends alarm and tamper signals
  • Sends low battery signals
  • Transmits periodic supervision signals
  • Installation in less than 5 minutes
  • Fully remote detector configuration
VESTA-271 | Optex transmitter via F1 868MHz radio
VESTA-271 TX-OPT-BXS-F1-868

Optex transmitter via F1 868MHz radio. BUS connection to the detector and radio transmission to the panel (F1). The transmitter is installed inside the detector. Allows sending RF signals via radio to the control panel. Teach/test button. LED indicator. Sends alarm and tamper signals. Sends low battery signals. Transmits periodic supervision signals. Installation in less than 5 minutes. Fully remote detector configuration

VESTA-268 | VESTA Energy Meter
VESTA-268 EMD-1ZW
  • VESTA Energy Meter
  • Measures, monitors and reports a household's energy consumption from the electricity meter
  • Counts LED pulses from the household meter and convert them into cumulative W and KW/h
  • Radio operation
  • Lightweight and easy to install
  • High stability and sensitivity
  • LED status indicator
  • Reports collected data to the control panel at regular intervals
  • Compatible with third party Z-Wave systems
  • Suitable for residential and commercial premises.
VESTA-268 | VESTA Energy Meter
VESTA-268 EMD-1ZW

VESTA Energy Meter. Measures, monitors and reports a household's energy consumption from the electricity meter. Counts LED pulses from the household meter and convert them into cumulative W and KW/h. Radio operation. Lightweight and easy to install. High stability and sensitivity. LED status indicator. Reports collected data to the control panel at regular intervals. Compatible with third party Z-Wave systems. Suitable for residential and commercial premises.

VESTA-270 | PIRCAM Vesta indoor detector
VESTA-270 VST-892-IL (lithium)
  • PIRCAM Vesta indoor detector
  • Detection range of 10 metres, 90°
  • Advanced dynamic speed adjustment algorithms to maintain an image transfer rate depending on signal quality
  • Installation height of 2.3 ~ 2.5 metres
  • Anti-pet up to 20 kg / 50 cm
  • Detection without blind spots
  • Remotely adjustable sensitivity
  • Three alarm image processing options: 640x480@3ips, 320x240@3ips and 320x240@6ips
  • Image delivery on demand
  • Anti-masking function
  • Infrared night illumination capability, up to 7 metres range
  • F1 technology accelerates transmission speed and increases communication range
  • Periodic monitoring signals
  • Tamper protection
  • Low battery detection
  • Suitable for security and home automation
  • Compatible with Climax F1 gateways/control panels and VESTA-030 repeater (RP-29-F1).
VESTA-270 | PIRCAM Vesta indoor detector
VESTA-270 VST-892-IL (lithium)

PIRCAM Vesta indoor detector. Detection range of 10 metres, 90°. Advanced dynamic speed adjustment algorithms to maintain an image transfer rate depending on signal quality. Installation height of 2.3 ~ 2.5 metres. Anti-pet up to 20 kg / 50 cm. Detection without blind spots. Remotely adjustable sensitivity. Three alarm image processing options: 640x480@3ips, 320x240@3ips and 320x240@6ips. Image delivery on demand. Anti-masking function. Infrared night illumination capability, up to 7 metres range. F1 technology accelerates transmission speed and increases communication range. Periodic monitoring signals. Tamper protection. Low battery detection. Suitable for security and home automation. Compatible with Climax F1 gateways/control panels and VESTA-030 repeater (RP-29-F1).

VESTA-142 | VESTA Kit consisting of:
VESTA-142 VESTA-142
  • VESTA Kit consisting of:
  • 1x VESTA-141 320-zone radio control panel only compatible with 4G LTe alarm.com; 8 partitions; Amplified quick connection for external GPRS antenna (not included); Grade 2
  • 1x PIR radio detector VESTA-009 (IR-29SL-F1) with Grade 2
  • 1x Magnetic contact via radio VESTA-013 (MDC-3-F1) with Grade 2
  • 1x 4-button radio push button VESTA-014 (RC-16-F1) with Grade 2.
VESTA-142 | VESTA Kit consisting of:
VESTA-142 VESTA-142

VESTA Kit consisting of:. 1x VESTA-141 320-zone radio control panel only compatible with 4G LTe alarm.com; 8 partitions; Amplified quick connection for external GPRS antenna (not included); Grade 2. 1x PIR radio detector VESTA-009 (IR-29SL-F1) with Grade 2. 1x Magnetic contact via radio VESTA-013 (MDC-3-F1) with Grade 2. 1x 4-button radio push button VESTA-014 (RC-16-F1) with Grade 2.

VESTA-141 | 320-zone home security centre via radio with IP Ethernet connectivity
VESTA-141 HSGW-G8-4G-F1-868-ZW-DT-18 (ADC)
  • 320-zone home security centre via radio with IP Ethernet connectivity
  • Only compatible with 4G LTe alarm.com
  • Supports RF 868-F1 and Z-Wave devices
  • TCP/IP connectivity and alarm.com's 4G LTE module (optional WiFi pin)
  • Amplified fast connection for external GPRS antenna (antenna not included)
  • Bidirectional RF up to 2 km
  • Integral solution with remote management
  • Domotics and live supervision
  • 8 partitions
  • Sending reports via CID/SIA, Email, SMS, and Push. iOS and Android App and web browser
  • The VESTA radio control panel is compatible with Google Home and Alexa
  • EN50131 Grade 2, Environmental Class II certified.
VESTA-141 | 320-zone home security centre via radio with IP Ethernet connectivity
VESTA-141 HSGW-G8-4G-F1-868-ZW-DT-18 (ADC)

320-zone home security centre via radio with IP Ethernet connectivity. Only compatible with 4G LTe alarm.com. Supports RF 868-F1 and Z-Wave devices. TCP/IP connectivity and alarm.com's 4G LTE module (optional WiFi pin). Amplified fast connection for external GPRS antenna (antenna not included). Bidirectional RF up to 2 km. Integral solution with remote management. Domotics and live supervision. 8 partitions. Sending reports via CID/SIA, Email, SMS, and Push. iOS and Android App and web browser. The VESTA radio control panel is compatible with Google Home and Alexa. EN50131 Grade 2, Environmental Class II certified.