IOT SmartHome

FIBARO Smart Implant sensor. Smart Implant is intelligence for your appliances in the form of a control cube. When installed in the appliance it extends its mode of operation with intelligent functions and features. All-in-one solution with Z-Wave technology. Turns common household devices into FIBARO Smart Home compatible devices.

EZVIZ air purifier. Covers up to 42 m². Four-stage air filtration: pre-filter, HEPA, activated carbon, and UV-C lamp. UV-C radiation (254 nm) for germicidal effect. Clean air delivery rate (CADR): Particulate; 350 m³/h. Genuine HEPA filter. Activated carbon filter. Filter replacement indicator. Three airflow modes. On/off timer. Child lock design.

Aeotec Radiator Thermostat thermostatic radiator head. Save up to 30% of energy. Intelligent heating control system. Allows you to adjust any room in your home to your preferred temperature. Change the temperature, anytime, anywhere. Thanks to Z-Wave and FLiRS technology, the thermostat reacts immediately to any temperature setting sent from your smart gateway. The illuminated LED display and buttons also allow you to manually control the desired temperature. No wiring or special tools are required to install the Aeotec radiator thermostat. The thermostat fits all M30 x 1.5 mm radiator valves. Several adapters for RAV, RAL, and RAVL valves are included.

Aeotec Smart Switch 7. Allows you to control lighting or any other device via Z-Wave controls. Compatible with all VESTA panels (Z-Wave). The smallest and safest smart plug. Certified by SGS, a certification company based in Switzerland. Installation in 5 seconds. Integrates SmartStart 3 layers of wireless security; unique network keys, 128-bit AES encryption, and ECDH key exchange. Built-in surge protection. Protects against surges/spikes up to 2,000 volts. Designed to CE EN60950 and EN301489 standards. Built-in overcurrent protection up to 10 amps.

Aeotec Nano Shutter micro shutter controller module. Allows the motor controls of your shutter, awning, blind or blind to be connected to your Z-Wave network. Command your blinds or shades remotely. Installs behind an existing switch. Up/down function (no positioning). Integrates the Z-Wave 500 series chip. 250% faster communication compared to standard Z-Wave devices. Supports Z-Wave S2 security framework. Automatic switch type detection. Compatible with all Z-Wave and Z-Wave+ controllers. Instantaneous and cumulative consumption function measurement. Use with toggle or impulse switches. Small, discreet, and aesthetic. Easy to use and install.

Aeotec Range Extender 7 Z-Wave+ Signal Repeater. Extends the range, reliability, and strength of the communication signal between Z-Wave and Z-Wave Plus devices. Repeats Z-Wave messages. Supports S2 Security and SmartStart (QR code configuration) technologies. Small form factor non-intrusive with other electrical outlets. Integrates the Z-Wave 700 series chip. Compatible with a multitude of certified Z-Wave gateways. Compatible with all VESTA panels (Z-Wave)

Aeotec Nano Switch all/nothing or on/off micro switch module with consumption measurement. Allows you to control electrical sockets or wall switches remotely via a Z-Wave controller. Compatible with all Z-Wave and Z-Wave Plus controllers. Compatible with switches and sockets. Compatible with all VESTA panels (Z-Wave). Allows appliances such as air conditioners and leaky refrigerators to be automatically turned off when they malfunction. Automatic switch type detection. Intelligent and automatic lighting by adding a motion detector. Turn off all lights automatically when you leave your home. Quick to install and easy to wire. Installs behind an existing switch. Protected against overloads and surges. Metering function for instantaneous and cumulative consumption. 2 configurable inputs for circuit breakers

Aeotec Nano Dimmer micro dimmer module. Allows a lamp or ceiling light to be controlled remotely via the Z-Wave Plus protocol. Automatically adjusts to the connected lighting. Can be used with various types of lighting: LED, dimmable LED, CFL, fluorescent, incandescent, halogen. Easy to install: it is placed in a wall box just behind the normal switch. Compatible with all VESTA panels (Z-Wave).

Aeotec Bulb 6 Multi-White LED Bulb (E27). Z-Wave Plus technology. Makes the light in your home smart. Fits all E27 sockets. Can be connected to the Smart Home gateway via Z-Wave technology. Allows you to vary the brightness and white tone of the light via remote control, smartphone, or tablet. Allows you to define a lighting mood according to your wishes. Allows you to use scenes (e.g. in the case of an alarm) to activate a specific light tone. Compatible with all VESTA panels (Z-Wave). Very low energy consumption compared to conventional bulbs. As bright as a conventional 60W bulb, but consuming only 9.5W. The lifetime of up to 25,000 hours.

Aeotec Bulb 6 Multi-Colour LED Bulb (E27). Z-Wave Plus Technology. Turns the light in your home into smart lights. Fits all E27 sockets. Can be connected to the Smart Home gateway via Z-Wave technology. Compatible with all VESTA panels (Z-Wave). Allows you to vary the brightness and colour of the light via remote control, smartphone or tablet. Allows you to define a light ambience according to your wishes. Allows you to use scenes (e.g. in the case of an alarm) to activate a specific light colour. Offers 16 million dimmable colours. Very low energy consumption compared to conventional bulbs. As bright as a conventional 60W bulb, but consuming only 9.5W. The lifetime of up to 25,000 hours.

Aeotec DoorBell 6. Z-Wave doorbell. Visual and audible alerts. Small, discreet, and aesthetic. OTA firmware update. Supports S2 security framework. Low battery detection. Supports up to 3 buttons. Multiple integrated sounds, up to 30. Adjustable volume. Compatible with all VESTA panels (Z-Wave). Easy to install and use.

ZKTeco Air Quality Controller with Wall Mounted CO2 Sensor. Multiple sensors: CO2, temperature and humidity. 2000 mAh rechargeable lithium battery. 3 meter USB charging cable is included. 24 hour real time supervision. Celsius and Fahrenheit temperature units

ZKTeco multifunctional air quality detector. 4.3 ”color LCD screen (480x270 pixels). Detects CO2, PM2.5 / 1.0 / 10, temperature, humidity. Large capacity lithium battery (3000 mAh). Charge via Micro USB 5V. Low battery warning

ZKTeco desktop CO2 detector for air quality control. Portable and versatile with a compact design that is easy to place anywhere. Easy to install independent Plug & Play sensors. Large digital LCD display to clearly display all measurement data. Reading in real time. The data is updated in real time every 1.5 seconds. High performance infrared sensor to precisely control indoor CO2 concentration, humidity and temperature. HEIMANN sensor from Germany. Rechargeable lithium battery (1000 mAh). Charge via USB cable.

ZKTeco USB dongle for air quality detection. USB plug-in air quality detector. Visually monitors the concentration and level of CO2 in the environment in real-time. USB communication allowing connection to ZKTeco TA or AC terminals via ZKBioseurity software. Display of the concentration value in 4 levels on the dongle. High concentration buzzer warning.