Nuvasafe EN54-21 alarm transmitter with Ethernet, mobile network and LORA

Technical features

• Nuvasafe EN54-21 fire alarm transmitter for fire detection and fire alarm systems.
• Also compatible with intrusion alarms
• Device designed for external mounting to PCI panel
• IP65 and UL94-V0 plastic enclosure with flanges for wall mounting
• Internal antennas for GPRS/NB-IOT/LTE-CAT-M1 and LORA
• 2 front LEDS for online status and fault indicators
• 3 inputs configurable as NO, NC, RFL or doubled
• Input sensitivity adjustment with 100 ms and 1 second resolution
• 8 partitions
• Up to 64 internal zones via IEEE 802.15.4 radio sensors
• Measurement of analog variables from compatible sensors
• Single-phase and three-phase meter reading via MODBUS RTU
• Integration of data reading via MODBUS RTU

Functionalities

• IoT 2G, NB-IOT, LTE-CAT-M1, Ethernet and LORA communicator to cloud
• Contact ID capture via non-EN54-21 certified PSTN interface
• Signal transmission from the associated panel to the cloud
• Event redirection to ARC via Nuva-CS application
• Capture of Contact ID and SIA-DC03 signals from partner panels via RTC, RS485 or RS232
• 8 subscriber codes
• Recording of analog values
• Programmable channel test from 1 to 65635 minutes
• TCP-IP and LORA polling programmable from 1 to 255 minutes
• Configuration and monitoring via cloud platform
• Local configuration via NuvaExpress via USB
• Cloud-assisted bidirectionality via web interface
• Universal bidirectionality with panels through modem simulation or local serial port via cloud
• Video alarm backup communicator for video recorders with integrated technology
• Sending of video analysis snapshot images in situations of IP network jamming

Intelligent functions

• Anti-jamming via LORA and NB-IOT
• Edge alarm processing on the device
• Extended control, data logging and IoT monitoring functions

Storage

• Internal queue of up to 126976 time-stamped events
• Logging of pollings performed
• Internal queue event retention of up to 40 years

Alarms

• 3 alarm and fault inputs configurable as NO, NC and RFL
• Default i1 and i2 inputs for main control panel alarm
• i3 input default for main control panel fault
• 2 open collector outputs
• Outputs O1 and O2 with negative activation
• 20 mA outputs O1 and O2
• Outputs O1 and O2 for signaling LEDS EN54-21 and associated panel
• Output O1 for signaling of online equipment with ARC
• Output O2 for signaling of transmission system routing failures
• Open collector outputs can be timed
• External relay modules for outputs Out5 to Out8

Communication interface

• TTL and RS485 interface
• RS232 interface via optional board
• Micro USB connection for configuration via NuvaExpress
• LIN-i4 input for RTC line
• Dummy line ANOUT output for connection to panel's TIP-RING
• Integration with DETNOV panels via RS485
• Integration with Honeywell ID50, ID60, ID3000, AM8200 and MORLEY panels via Virtual COMPORT
• SIA-DC03 integration via Ethernet for LAN signal routing to GPRS/NB-IOT/LTE-CAT-M1 and LORA
• SIA-DC09 integration via Ethernet to Contact ID and SIA

Integration with fire control panels

• HONEYWELL
  • ID50/ID60 Series via RS232 through CV232-485 accessory, supports App control
  • ID3000 Series via RS232 through CV232-485 accessory, supports App control
  • AM8200 Series via RS232, supports App control
  • AM4000 and AM6000 Series via RS485, supports App control
  • MA2000 and MA8000 Series via RS485, supports App control
  • MORLEY-VSNLT series via TTL/RS485 via CB-MORLEY accessory, supports App control
  • MORLEY-DXC2/4 series through RS232 via CV232-485 accessory, supports App control
  • MORLEY-LT32/LT159 series via TTL/RS485 via CB-MORLEY accessory, supports App control
  • PL1000 Series via TTL/RS485 through CB-MORLEY accessory, supports App control
  • ESSER-FlexES series via RS485, supports App control
• COFEM
  • LYON series via RS485 (Modbus-RTU), supports App control
  • CLVR series via RS485 (Modbus-RTU), App control supported
• It also integrates with DETNOV (CAD 150 and CCD-020), INIM (PREVIDIA), KOMTES (JUNONET), ADVANTRONIC (AD300 and AD600), AGUILERA (all), NSC-SISTEMAS (all), PANASONIC (all), TECNOFIRE (2 and 4 loops), DMTECH (all), JADE BIRD (DRAKO), KILSEN (KFPA), PROTECT-FIRE (all), JHONSON CONTROLS (FIRECALL FC50x), BOSCH (FPA-5000 / 1200) and KENTEK (TAKTIS).

network

• Triple communication path via Ethernet, GPRS/NB-IOT/LTE-CAT-M1 and LORA
• Ethernet connectivity for TCP-IP to cloud communications
• LORA-MESH communication in ISM free band 868, 433 and 169 MHz
• LORAWAN connectivity
• LORA frequency in Europe of 869.525 MHz
• LORA frequency in the Americas of 919.5 MHz
• LORA range up to 1 km in the city with indoor installed equipment
• Two-way LORA communication for alarm signals, polling, equipment configuration and control
• GPRS bands 850, 900, 1800 and 1900 MHz
• Global VPN SIMCARD included
• Compatible SIM card: SIMALARM(SIMALARM card activation)
• Secure communications via HTTPS and TLS 1.2

Power supply

• 5 to 30 VDC power supply
• Dual power input to the circuit according to EN54-21 section 7.5.2
• 12 to 30 V +B power supply input
• Power input +Vi from 12 to 30 V
• +Vo output for external sensors up to 200 mA
• 300 mA fuse on main PCB
• 3 mA PCB consumption
• GPRS/NB-IOT/LTE-CAT-M1 module consumption of 5 mA
• Ethernet consumption of 15 mA
• LORA module consumption of 3 mA
• GPRS/NB-IOT/LTE-CAT-M1 transmission consumption of 100 mA
• Optional internal battery support

Environmental

• Environmental class EN54-21 3K5 to EN 60721-3-3
• Working temperature -10ºC to +40ºC (-10ºC to +40ºC)
• Working humidity from 0% to 95% without condensation
• Equipment suitable for mounting on concrete or other non-combustible surface

Physical characteristics

• IP65 and UL94-V0 plastic enclosure
• Wall mounting by means of mounting tabs
• Dimensions: 120 mm × 75 mm × 45 mm
• Weight: approx. 200 g

Contents

• EN54-21 Nuvasafe DEM-1372 alarm transmitter (PYRUS-TLE-ID)
• PYRUS enclosure
• Internal antennas
• PYRUS-V21 RS485 circuitry
• SIMCARD VPN
• Fixing screws

Certifications and standards

• EN54-21 certification for alarm transmission and fault reporting equipment in fire detection and fire alarm systems
• CE marking according to EN54-21:2006
• Certificate CPR 0051-CPR-2841
• Transmitter DP4 according to EN50136-2
• Type X according to EN50131-10
• Environmental Class II according to EN50131
• Alarm transmitter certification Grade 3
• Electromagnetic Compatibility Directive 2014/30/EU
• Low Voltage Directive 2014/35/EU
• Directive 2011/65/EU RoHS
• Directive 2014/53/EU RED
• EN 62368-1 for electrical safety of information technology equipment
• EN 301489-1 for electromagnetic compatibility of radio equipment
• EN 300 220-1 for SRD devices from 25 MHz to 1000 MHz