Shutter 3 FIBARO module for remote control of motorized blinds

Name: FIBARO-003
SKU: FGR-223
Rating: 5 (4 reviews)

FIBARO-003

FGR-223

This product is discontinued

Hoofd functies

Shutter 3 FIBARO module for remote control of motorized blinds, Venetian blinds, awnings and gates
Based on Z-Wave 5 technology
Works with single-phase AC
Provides precise positioning of blinds, awnings or doors
Incorporates power measurement function when used with a FIBARO Home Center
Compatible with any Z-Wave or Z-Wave Plus controller
Supports Z-Wave S0 (Z-Wave Network Security) protected mode with AES encryption and S2 with PRNG encryption
Compatible with all VESTA panels (Z-Wave) Supports blind motors with mechanical and electrical limit switches
It works on the basis of advanced microprocessor control
It allows measuring the active power and the total energy consumption
It works with different types of buttons: monostable, bistable and roller blinds
Designed for installation in flush-mounted or surface-mounted boxes that meet national safety standards.

Specificaties

Specifications

Radio protocol: Z-Wave (500 series chips)
Radio frequency: 868.4MHz, 869.8MHz (EU)
Radio signal strength: up to 6 dBm
Distance: up to 50 meters outdoors, up to 30 meters indoors (depending on building materials)
Compatible Motor Type: Single Phase AC Motors
Compatible with all VESTA panels (Z-Wave)

Necessary limit switches: electronic and mechanical
Active element: micro-gap relay switch μ
Power supply: 100V ~ 240V AC, 50 / 60Hz
Rated load current: 1.7A (inductive loads) / 4.2A (resistive loads)
Consumption: up to 0.8W
Operating temperature: 0 ° C ~ + 35 ° C
Relative humidity: 10% ~ 95% (non-condensing)
Dimensions: 42.5 (W) x 38.25 (H) x 20.3mm
To install in boxes: Ø≥50 mm, depth ≥60 mm
EU Directives: RED 2014/53 / EU, RoHS 2011/65 / EU

Documentatie

	Taal	Naam	Type	Actie
	EN		Handleiding
	NL		Zelf Gegenereerd Bestand
			Afbeelding

Opmerkingen

Er zijn geen opmerkingen voor het product. FIBARO-003.