OPTEX VX Infinity Intrusion Detector Kit + Wireless HD Camera

Characteristic

A powerful combination of intelligent outdoor detection and HD camera that offers a reliable alarm video verification solution for home and business security. The OPTEX-187 (VXI-ST/CMOD) solution relies on OPTEX's best-selling outdoor intrusion sensor, VX Infinity, and is complete with instant notification, live streaming, and recordings from the 180-degree HD camera module that, in addition to It is easy to mount and has night vision. The outdoor sensor and Wi-Fi camera can be added to an existing alarm panel or installed as a stand-alone outdoor intrusion detection solution and managed directly from a mobile app. VXI-ST is the standard wired PIR model.

Camera

Wireless connectivity: IEEE 802.11 b/g/n
Data encryption: AES 128-bit data encryption using its own P2P connection protocol
Security: WEP/ WPA/ WPA2 (TKIP, 128-bit AES)
Simultaneous views: OPTEX Vision App: Max. 3 users at the same time live view. *Quality may be affected when connecting multiple
mobile simultaneously
Sensor image: 2MP (Full HD)
Image Resolution: 1,080P/ 720P/ VGA (Selectable from App)
View Angle: H: 180° V: 100°
Minimum illumination: 0 lux (with infrared illumination)
Night View: Low and High Infrared LED Light with IR Switch
Image Compression: H.264 HP
Image resolution: Full HD
Frames per second: OPTEX Vision App: 15 FPS, RTSP: 10 FPS
IP address: DHCP or fixed IP
RTSP Authentication: Digest Authentication on or off
Recording duration: OPTEX Vision App: 30 seconds (inc. 2 seconds before alarm)
Memory card: microSD card (max. 32 GB)
Power input: 9.5 to 24 V DC
Current consumption: Low infrared mode: max. 400 mA / High infrared mode: max. 1.0A
Activation time: 2 min.
LED indicator: 1 LED (red and blue)
Microphone: Integrated (audio only available with the OPTEX Vision App)
IR mode selector: High / Low
Antenna: The external antenna (CMOD-ANT) is an optional accessory not included
Installation: Outdoor / Indoor
Operating temperature: -10°C to +50°C
Operating humidity: 90% max. (not condensed)
IP rate: IP 55
Weight: 280g

Detector

Detection Method: Passive Infrared
PIR detection coverage: 12 m, wide 90° / 16 zones
PIR maximum distance: 12 - 2.5 m (5 levels)
Detectable speed: 0.3 - 1.5m/s
Sensitivity: 2°C at 0.6m/s
Power input: 9.5 – 18 VDC
Current consumption: 20 mA (max) at 12 VDC
Alarm period: 2 ±1 sec.
Preparation period: Approx. 60 sec (LED flashes)
Alarm output: [N.O. or N.C] selectable, 28 VDC 0.1 A max.
Trouble output: -
Tamper Output: N.C. 28 VDC 0.1 A max. Activates when cover is removed
LED indicator: Red: Preparation, Alarm,
RF interference: No alarm 10V/m
Operating temperature: -30 to +60°C
Operating humidity: 95% max.
International protection: IP55
Mounting: Wall, pole (outdoor / indoor)
Mounting height: 0.8 - 1.2m
Weight: 500g