15m Volumetric detector

15m Volumetric detection coverage. Ideal for protection of rooms and offices in commercial environments.

Selectable EOL resistors

The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

AND/OR technology

‘AND’ mode operates as a standard dual technology detector, where both technologies need to active to cause the alarm. ‘OR’ mode will switch the sensors activation of the alarm input to be either the PIR ‘OR’ Microwave. This can be useful in environments where there is a risk of PIR detection being blocked.

Active self test

If there is no activation after a 5 hour period it will actually self test both the PIR and microwave.

Blue Wave Technology (BWT)

This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:

The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges. Digital temperature compensation digitally adjusts the detectors sensitivity to ensure performance is maintained Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

Auto Sensitivity Feature

Depending on the environment condition, the detector will automatically adjust the sensitivity.

Triple LED indication

Microwave – orange, PIR – green, alarm – blue

Microwave Frequencies Bands

3 different frequency bands to avoid interference between detectors are installed in the same room.

Features - Double technology Pyronix detector - 15 m range, 85° - 74 detection beam and 7 detection planes - Sealed lens - Zero angle detection - Installation height 1,8 ~ 2,4 m - Speed detection 0,3 ~ 3ms - White light filter (6500 lux) - UV filter - Selectable sensibility (auto, high) - Separate microwave indication, PIR and alarm - Triple microwave frequency to avoid interference: 10,515/10,525/10,535 GHz - Relay output: 60V DC, 50 mA, 42V AC (RMS) - Sabotage tamper (12V, 50 mA) - Blue Wave technology reduces false alarms - Digital temperature compensation - EOL selectable resistors incorporated - Protection against manipulations - RFI inmunity (25 V/m) continuous wave, modulated wave and pulse 80~2700 MHz - Power supply: 9V ~ 16V DC - Consumption: 23 mA standby, 30 mA on alarm - Working temperature: -30°C ~ +50°C - Dimensions: 117 x 69 x 55 mm - Weight: 125 g (without bracket) - Wall and ceiling bracket supported - 5 year warranty - Enviromental class II - EN50131 Grade 2