Gateway IQ8Control C

Specifications

• Gateway algorithmic fire detection
• Requires ESSER-42 front display (786006)
• Up to 2 micro module slots
• Up to 2 analog loops (254 devices) as isolated Gateway or 1 loop (127 devices) as Gateway essernet network
• Up to 1000 zones and 1000 outputs
• Analog loop protected against short-circuit or open circuit
• Loop wiring 2-wire x 0.8 mm2 to 2.5 mm2 shielded braided hose, up to 3.5 km depending on the load
• Up to 127 devices per analog loop configurable in up to 127 zones per loop
• Up to 32 transponders per analog loop
• Maximum load factor per loop, 96 (esserbusPLus): Up to 48 IQ8Quad detectors with siren or flash (Load factor 2); up to 32 sirens/detectors with voice/siren and flash (Load factor 3)
• Maximum load factor per Gateway, 384: Up to 96 IQ8Quad detectors with siren or flash (Load factor 2); up to 64 sirens/detectors with voice/siren and flash (Load factor 3)
• Up to 3 freely programmable relays as supervised, voltage output 12V or dry contact up to 24V/1A (with expander 772477)
• TTY or RS485 protocol output
• Optional micro-module/converter for matrix printer connection or basic RS-232 protocol output
• Connection of up to 31 LCD repeater panels with RS485 displays
• 62.5 kBd or 500 KBd essernet network for up to 31 devices (control panels, network repeaters with keypad or SEI-KIT communications interface)
• 10,000 event history
• Supervision and charging circuit for 2 emergency batteries
• Connection to TG-ESSER management software via SEI-KIT network interface (requires essernet network connection) with complete protocol
• Power supply: 230V AC, 50/60Hz
• Power supply output voltage: 12V DC
• Current consumption: 300 mA without front-end, 340 mA with front-end
• Nominal consumption: 0.7A
• Maximum external current: 2A
• Operating temperature: -5°C ~ +45°C
• Dimensions: 450 (W) x 320 (H) x 185 mm
• Weight: 6.5 kg