Notifier FSL100 IR3 flame detector for indoor and outdoor use and ATEX zone 2/22

Technical features

• IR3 Notifier Flame Detector FSL100 Series
• Triple spectrum IR flame detection
• 35 m range for alarm activation in 10 seconds for n-heptane fire of 0.1 m².
• Minimum 90° horizontal and vertical cone of vision
• Particularly suitable for liquid hydrocarbon and dirty fires
• Particularly suitable for smoky fires
• Less effect of window contamination or smoky fires
• Flame detection of heavy hydrocarbons such as wood, paper and gasoline
• Detection of light hydrocarbons such as methanol and methane
• Local LED indicators for normal operation, fault, fault with self-test repeat, and alarm

Functionalities

• Flame flicker frequency analysis for improved false alarm rejection
• Automatic full self-test
• Optional remote manual manual self-test
• Continuous monitoring of system status
• Good resistance to direct and reflected sunlight
• Good resistance to fluorescent tubes and glass-covered halogen lamps
• Good resistance to arc and electric shock
• Good resistance to radiation from electric welding more than 3 m from the detector
• Start-up time less than 10 seconds
• Alarm response time between 8 and 30 seconds

Alarms

• Alarm relay output SPDT 30 VDC and 2 A, 60 W maximum, de-energized in normal non-alarm operation
• 30 VDC, 2 A, 60 W maximum SPDT fault relay output, de-energized in normal operation without fault
• Alarm configuration with selectable latching or non-latching LEDs and relays
• Interlocked factory setting
• Connection to fire control panels via end-of-line resistors and surge current alarm

Communication interface

• 4-20 mA current output available as standard, in increments, sinking and non-isolated
• 0 mA output for power failure or microprocessor fault
• 2 mA output for optical fault
• 4 mA output for normal operation
• 20 mA output above 20 mA for alarm
• Terminals suitable for wires from 0.5 mm² to 1.5 mm².
• M20 cable entry with cable gland for cable from 5.5 to 13 mm².

Power supply

• Power supply 12/24 VDC with nominal range 10 to 28 VDC
• Normal operating current 25 mA at 24 VDC
• Current in alarm ±75 mA at 24 VDC

Environmental

• IP65 protection against dust and water
• Operating temperature -40 °C to +70 °C (-40 °C to +70 °C)
• Ambient temperature ATEX and FM class 3611 from -25 °C to +70 °C

Physical characteristics

• Non-flammable GRP glass fiber reinforced polyester housing
• UV-resistant and self-extinguishing V-0 housing according to UL-94
• High visibility red color
• Pressure compensated to prevent moisture accumulation inside due to atmospheric pressure changes
• Dimensions: 125 x 80 x 57 mm
• Weight: 465 g

Contents

• NOTIFIER-350 IR3 flame detector (FSL100-IR3)

Certifications and standards

• EN54-10 high sensitivity certificate
• EN54-10 Class 1 approval for IR3 type
• ATEX/IECEx Zone 2/22 compliant
• Suitable for FM 3611 Class 1, 2 and 3 Division 2