TP-Link Omada L2+ managed switch with 24 x 2.5 Gbps RJ45 ports, 4 x 10 Gbps SFP+ slots and cloud management

Technical Specifications

• TP-Link Omada JetStream L2+ Managed Switch with 24 Multigigabit RJ45 Ports and 4 10 Gbps SFP+ Slots
• 24 2.5 Gbps RJ45 Ethernet ports
• 4 10 Gbps SFP+ slots
• 200 Gbps switching capacity
• Packet forwarding rate of 148.8 Mpps
• 32K-entry MAC address table
• 16 Mbit packet buffer
• Supports 9 KB Jumbo Frames
• 8 QoS priority queues

Functionalities

• L2+ switching and L3 static routing functions
• Up to 32 IPv4/IPv6 interfaces and 48 static routes
• Up to 128 static ARP entries, ARP proxy, and free ARP
• DHCP server and DHCP relay
• Static and dynamic IEEE 802.3ad LACP link aggregation, with up to 8 groups of 8 ports
• STP, RSTP, and MSTP protocols for network loop prevention
• Port- and VLAN-based loop detection
• IEEE 802.3x flow control and HOL blocking prevention
• Port mirroring for traffic monitoring
• Up to 4,096 VLAN groups with support for IEEE 802.1Q, MAC VLAN, GVRP, QinQ, and voice VLANs
• IGMP Snooping v1/v2/v3, IGMP Querier, and multicast filtering
• MLD Snooping v1/v2 and Multicast VLAN Registration (MVR)
• IEEE 802.1p CoS/DSCP QoS prioritization with SP, WRR, and SP+WRR algorithms
• Bandwidth control and limiting per port or flow
• ACLs based on MAC, IP, IPv6, time, and packet content
• IP-MAC-Port binding, DHCP Snooping, and ARP inspection
• Protection against DoS attacks and control of broadcast, multicast, and unicast storms
• IEEE 802.1X, RADIUS, and TACACS+ authentication
• Port isolation and static and dynamic port security
• Support for IPv4/IPv6 dual stack and static IPv6 routing

Communication Interface

• 1 RJ45 console port
• 1 Micro-USB console port

Network

• 24 2.5 Gbps RJ45 Ethernet ports
• 4 10 Gbps SFP+ slots for high-speed links
• Centralized management via Omada SDN
• Compatible with Omada Cloud-Based Controller, Omada Software Controller, and OC200 and OC300 hardware controllers
• Remote access via the cloud and the Omada app using a compatible controller
• Zero-Touch Provisioning (ZTP) via the Omada Cloud-Based Controller
• Standalone management via web interface and CLI via console, Telnet, or SSH
• Compatible with SNMP v1/v2c/v3, RMON, and LLDP/LLDP-MED
• Web management via HTTPS
• Batch configuration, firmware updates, and intelligent network monitoring
• Supports Dual Image, cable diagnostics, and system event logging

Power

• 100–240 V AC, 50/60 Hz
• Maximum power consumption of 45.1 W at 110 V/60 Hz
• Maximum heat dissipation of 154.38 BTU/h at 110 V/60 Hz

Environmental

• Operating temperature: 0°C to +40°C
• Operating humidity: 10% to 90% RH, non-condensing
• Storage temperature: -40°C to +70°C
• Storage humidity: 5% to 90% RH, non-condensing

Physical Characteristics

• Rack-mountable
• 1 built-in fan
• Dimensions: 440 x 180 x 44 mm

Contents

• TP-Link Omada TPLINK-362 (SG3428X-M2) L2+ Managed Switch
• Power cable
• Rack-mount kit
• Rubber feet
• Quick Installation Guide

Certifications and Standards

• CE and FCC certifications