Esser FlexES basic equipment for 10 loops

Specifications

• Flexible Plug&Play module configuration
• 10 slots for up to 10 analog loops
• Analog loop protected against short-circuit or open circuit
• 2-wire x 0.8~2.5 mm² shielded braided hose loop wiring, up to 3.5 km depending on load
• Up to 127 devices per analog loop configurable in up to 127 zones per loop
• Up to 32 transponders per analog loop
• Maximum load factor per loop, 96 (esserbusPLus): Up to 48 IQ8Quad detectors with siren or flash (Load factor 2), up to 32 sirens/detectors with voice/siren and flash (Load factor 3)
• Emergency mode of each of the loops
• The devices of a loop without communications switch to conventional mode, activating all the zones of the loop in case of alarm.
• 4 configurable outputs
• 9999 zones + 9999 outputs
• Up to 2 optional single loop modules (esserbus/Plus) with galvanic isolation
• Logging of up to 10,000 events
• Emergency power supply: 24V and 150 W/ (6A) power supply with up to 4x12V/24Ah batteries
• Auxiliary power supply output 3 x 24V DC
• Up to 3 cascaded power supplies 450 W (18A) with up to 4x12V/24Ah batteries
• Up to 31 panels in essernet network
• Ports and communications: USB, Ethernet, RS485 and TTY port on CPU
• Parameterization, calibration, programming and diagnostics directly via USB
• Storage temperature -10°C ~ +50°C (-10°C ~ +50°C)
• Operating temperature -5°C ~ +45°C (-5°C ~ +45°C)
• Degree of protection IP30, according to EN 60950
• Housing made of ABS plastic with 10% fiber reinforced, V-0
• Color: gray
• Dimensions: 450 (W) x 960 (H) x 185 mm
• Weight: 17 kg
• Certificate 0786-CPD-20903