Addressable Honeywell MORLEY-IAS module for 1 240 VAC control output

Technical Characteristics

• Honeywell MORLEY-IAS analog addressable module with 1 switching output at 240 VAC
• Controls one unsupervised bipolar output with 1 normally open and 1 normally closed contact
• Bistable relay with latching on or off state on command from the Gateway fire
• 5 A at 30 VDC and 5 A at 250 VAC relay specifications with resistive load
• Addressability via rotary selectors
• Relay ON position configurable according to BSI 7273-4
• 6+4 removable terminal blocks
• 4-terminal block for 24 V and 6-terminal block for 240 V
• Max. cable cross-section 2.5 mm2

Functionalities

• Three-color indicator light with diagnostic information on input/output status
• Status LED and direction selector visible without removing the surface-mounted enclosure cover
• Laser-etched identification information on the housing
• High power loop ready for 48 V
• Low quiescent current
• Common mechanics for module housing
• Improved visibility on both sides

Communication interface

• Loop powered communication
• CLIP and Advanced protocol

Power supply

• 15 to 32 VDC operating voltage
• LED turn-off voltage of 16.5 VDC
• Maximum quiescent current 75 µA at 24 VDC without communication
• Maximum alarm current of 5.5 mA at 24 VDC with one communication every 5 seconds and LED blinking enabled
• Coil on/off current of 76 mA maximum for 12 ms
• Built-in and selectable short-circuit isolator

Environmental

• Operating temperature -20°C to +60°C (-4°F to 140°F)
• Relative humidity 5 to 95% non-condensing
• IP30 degree of protection

Physical characteristics

• White housing
• Integrated 35 mm DIN rail bracket
• Dimensions 99 x 93 x 22 mm
• Weight 118 g

Contents

• MORLEY-36 1-output addressable control module (MI-D240CMOE)

Certifications and standards

• VdS and CPR approval
• EN 62368-1 certification