ALPR MOBOTIX MOVE 2MP vandal-resistant IP camera

Technical features

• ALPR MOBOTIX MOVE vandal-resistant IP camera for outdoor use
• Sony STARVIS 1/2.8" 2MP progressive CMOS sensor
• 1080P resolution (1920x1080)
• Varifocal lens 2.7 to 12 mm motorized with F1.6 to F2.9 aperture, zoom, focus and P-Iris
• Horizontal field of view 102.1° to 31.5° and vertical field of view 70.3° to 22.7°.
• Minimum illumination of 0.02 lx in color and 0.001 lx in black & white
• Mechanically switchable automatic IR cut-off filter
• Shutter speed up to 1/43040 s
• MOBOTIX EverClear superhydrophilic nano-coating on front glass

Video

• H.265, H.264 and MJPEG compression
• Up to 4 individually configurable streams in H.264, H.265 and MJPEG
• Stream 1: 1080P@30 fps in H.265/H.264
• Stream 2: 720x480@30 ips in H.265/H.264
• Stream 3: 1080P@30 ips in MJPEG
• LBR, VBR and CBR configurable in H.265 and H.264

Features

• Image settings for color, brightness, sharpness, contrast, white balance and exposure control
• WDR up to 130 dB
• 2DNR, 3DNR and motion noise reduction
• Mask and text overlay
• Slider mode with 90°, 180° and 270° rotation

Intelligent features

• Integrated ALPR/OCR automatic license plate recognition
• License plate reading for stopped and slow moving vehicles
• 1 or 2 lane monitoring
• Reading distance up to 18 m
• Effective IR distance up to 20 m for ALPR
• Recommended speed from 0 to 60 km/h
• CMM classification by vehicle make, model and color
• Direction of travel information and filtering
• Integration of results in push and pull modes via API
• Integrated whitelist and blacklist management
• Motion detection and audio detection

Audio

• G.711, G.726, AAC and LPCM audio compression
• Bidirectional audio
• 1 line audio input
• 1 line audio output

Storage

• 64 GB MicroSD card preinstalled
• Up to 1TB MicroSD/SDHC/SDXC slot
• Supports NAS, MOBOTIX HUB and MOBOTIX MOVE NVR recording

Alarms

• 2 alarm inputs and 1 alarm output
• Event triggers for external input, analytics, network fault detection, periodic event, manual trigger and MxMessageSystem messages
• Alarm actions with external output triggering, video and audio recording, file upload via FTP, network share and email, and notification via HTTP, FTP and email

Communication interface

• RJ45 connector
• Terminal block for alarm input x2 and alarm output x1
• Audio input and audio output terminal blocks
• DC12V/AC24V terminal block
• 75 ohm CVBS COAX connector

Network

• 10/100 Mbps Ethernet interface
• ARP, PPPoE, IPv4/v6, ICMP, IGMP, QoS, TCP, UDP, DHCP, UPnP, SNMP, SMTP, RTP, RTSP, HTTP, HTTPS, FTP, NTP, DDNS and SMBv2 protocols
• ONVIF profile S, G, T and M support
• Compatible with all current browsers

Power supply

• IEEE 802.3af class 0 PoE power supply
• Additional 12 V DC or 24 V AC power supply
• Maximum power consumption 12.95 W per PoE, 15.59 W at 12 V DC and 13.31 W at 24 V AC
• Supported PoE modes A or B

Environmental

• Operating temperature -55 to 60 °C with heater
• Cold start temperature of -30 °C
• 90% relative humidity without condensation
• IP66, IP67, and IK10 protection

Physical characteristics

• Metal rear housing and PC front
• Color RAL 9003
• Dimensions ø 105 x 232 mm
• Weight 1280 g

Contents

• ALPR MOBOTIX MOVE vandal-resistant IP camera MOBOTIX-131 (Mx-VB1A-2-IR-ALPR)
• 64 GB MicroSD card pre-installed

Certifications and standards

• EMC: CE, FCC and BIS
• Security: LVD