QX Infinity Series Outdoor 120° QUAD PIR Detector

The QX Infinity (QXI) series is a family of dual-technology infrared sensors offering a wide 120° detection angle and 12m coverage. Its elegant and compact design makes QXI sensors an ideal model for any residential or commercial building, offering reliable motion detection, animal immunity and activation of CCTV camera alarm panels. OPTEX-174 (QXI-ST) is the wired model.

Adjustable mounting height

QXI outdoor intrusion detectors can be installed high - between 2.2m and 2.7m high - a multi-level volumetric detection pattern that allows you to ignore small animals. In environments with large animals, the sensor can be mounted between 0.8 and 1.2 m high, to ignore the passage of pets.

Detection pattern analysis to ignore false alarms

All QXI models are provided with an analysis logic called SMDA, which analyzes the detection pattern and changes in the environment, such as weather or vegetation movements, to discriminate noise and the cause of nuisance false alarms. . In addition, the entire QXI range is provided with a double conductive cover to filter interference due to light or electromagnetic.

Elegant design and easy installation

The detector's dimensions and cover finish have been designed to blend in with the façade of any residential or commercial building. Also with the customer in mind, the sensor has a screwless design that makes it very easy to open and close the front cover just by using a flat-head screwdriver.

Characteristic

12m, 120 degrees, outdoor PIR
QUAD pyrosensor, two detection layers and good tolerance to small animals
High mount (2.2-2.7m) or regular mount to ignore pets
SMDA logic and double conductive jacket to minimize false alarms
specs

Outdoor QUAD PIR detector
Detection Method: Passive Infrared
12 meter range
120° coverage angle
PIR Zones: 40 zones (Multilevel), 18 zones (pet alley)
Detection speed: 0.3~2m/s
Sensitivity: 2°C at 0.6m/s
Pet Alley: Remove bottom detection to ignore small animals
Mounting height: 2.2 ~ 2.7 meters (multi-level), 0.8 ~ 1.2 meters (pet alley)
Alarm period: 2 sec. (±0.5 sec.)
Boot period: 60 sec. (approx.)
Alarm output: NC/NO, selectable, 28V DC, 0.1A
Tamper output: NC, 28V DC, 0.1A (activates when cover is removed)
Advanced SMDA (multidimensional analysis) processing logic
LED indicator: 1. Readiness, 2. Alarm, 3. End of walk test
Power: 9.5V ~ 16V DC
Current Draw: 20mA maximum, at 12V DC
Operating temperature -40°C ~ +60°C
Relative humidity up to 95%
Degree of protection IP54
Wall mount (interior or exterior)
Optional wall (OPTEX-37) and ceiling (OPTEX-38) brackets with horizontal and vertical adjustment
Dimensions: 78 (W) x 144.5 (H) x 59 (D) mm
Weight: 180g