Access control controller

Description

Powerfull and stable access control controller, that works with logic architecture design. The uplinks and downlinks adopt TCP / IP and Wiegand communication respectively. Signal is processed with a special encryption and can be executed without connection. It also has an anti-sabotage feature.

Features

• 32 bits high speed processor
• TCP/IP communication, with autoadaptive network interface
• Wiegand interface supported 26/34 for card reader access
• Storage: 10.000 cards and 50.000 events
• Function: first card, super card and super password, online update and door remote control
• It supports several card classifications such as normal / disabled / blacklist / patrol / visitor / coercion / super card, etc.
• Supports tamper alarms for card readers, unsafe door alarms, forced entry door alarms, opening timeout alarms, duress alarms and alarms for use of invalid cards, insufficient storage alarm for events outside of line and network cut alarm
• Recognition and storage of card numbers with a maximum of 20 digits
• Supports online and offline mode of operation
• Supports time synchronization via NTP, manual or automatic
• Watchdog for detecting the status of the running device
• The data can be saved permanently when the access controller is turned off

Specs

• 32 bits high speed processor
• Memory: 8 MB RAM
• Capacity: 10.000 valid cards
• Events: 50.000 reg card pass
• Upload communication interface: TCP/IP
• Download communication interface: Wiegand 26/34
• Readers: 4 card readers with Wiegand interface
• Input interface: 2 door sensors, 2 output button (REX), 2 alarm input
• Output interface: 2 lock door relay, 2 alarm relay
• Clock battery incorporated
• LED indication: Power supply status, status communication and abnormal state
• Power supply: 230V AC
• Power disipation (with charge): ≤100W
• Consumption: ≤3,5W (without charge)
• Working temperature: -20°C ~ +65°C
• Working RH: 10% ~ 90%, without condensation
• Dimensions: 285 x 237 x 69 mm